DFE201612E-1R0M=P2
Murata Electronics
Needs validationlow risk
Strong electrical upgrade from the same manufacturer, but is slightly taller.
Best Alternatives to DFE201610E-1R0M=P2
Find reliable alternatives for the Murata DFE201610E-1R0M=P2, a 1.0µH shielded power inductor in a 2016/0806 package. This guide compares substitutes, highlighting key differences in current ratings and DCR.
AI replacement insight
Electrical riskhigh
Many same-size alternatives have lower current ratings.
Package risklow
Footprint is standard, but height can vary.
Sourcing risklow
Many vendors produce similar 1uH 0806 inductors.
Can it be replaced directly?
Yes, several parts like the Murata DFE201612E-1R0M=P2 share the same 2016/0806 footprint and 1.0µH inductance, but current ratings and DCR must be carefully verified for your specific application.
Best replacement path
The Murata DFE201612E-1R0M=P2 offers upgraded current ratings and lower DCR in a slightly taller package, making it a strong upgrade candidate.
Main risk
The primary risk when substituting is a lower current rating (both saturation and thermal), which can lead to performance degradation or component failure under load.
Recommended alternatives
6Alternative comparison matrix
| Feature / factor | DFE201610E-1R0M=P2 | DFE201612E-1R0M=P2 | TFM201610ALMA1R0MTAA | WPN201610H1R0MT | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 2016 (0806) | 2016 (0806) | 2016 | 2016 | 2016 (0806) / 2016 (2.0 x 1.6 mm) — Footprint matches, but height is 1.2mm vs target's 1.0mm.; TFM201610ALMA1R0MTAA: Package size 2.0x1.6mm matches.; WPN201610H1R0MT: Package size 2.0x1.6mm matches.; WPN201610U1R0MT: Package size 2.0x1.6mm matches. |
| Inductance | 1.0 µH | 1.0 µH | - | 1.0 µH | 1.0 µH — Inductance matches.; WPN201610H1R0MT: Inductance matches. |
| Saturation Current A | 3.6 A | 4.0 A | 3.3 A | 3.85 A | 4.0 A / 3.3 A / 3.85 A / 3.0 A — Saturation current is higher, providing more margin.; TFM201610ALMA1R0MTAA: Saturation current is lower, reducing performance margin.; WPN201610H1R0MT: Saturation current is higher, providing more margin.; WPN201610U1R0MT: Saturation current is 17% lower, increasing risk of saturation. |
| Dcr Ohm | 0.057 Ω | 0.048 Ω | - | 0.070 Ω | 0.048 Ω / 0.070 Ω / 0.050 Ω — DC Resistance is lower, improving efficiency.; WPN201610H1R0MT: DC Resistance is higher, resulting in more power loss.; WPN201610U1R0MT: DC Resistance is slightly lower (better). |
| Current | 2.7 A | Missing | 3.1 A | 2.05 A | Missing / 3.1 A / 2.05 A / 2.1 A — Thermal current not in specs, but datasheet suggests 3.2A (upgrade).; TFM201610ALMA1R0MTAA: Thermal current (Itemp) is higher (better).; WPN201610H1R0MT: Thermal current (Irms) is 24% lower, requires circuit validation.; WPN201610U1R0MT: Thermal current (Irms) is 22% lower, requires circuit validation. |
| Application | Commercial | - | AEC-Q200 | - | AEC-Q200 — Automotive grade may be an unnecessary feature/cost. |
Application & sourcing insights
Questions & answers
The Murata DFE201612E-1R0M=P2 is a strong candidate, offering better performance in a similar package. However, verification of its 1.2mm height and current ratings is essential for your design.