
MEGASTAR
A 4-pin, 2-row, 4.2mm pitch right-angle header from MEGASTAR, potentially compatible with DLL-5566-4A.
DLL-5566-4A is a 4-pin, 2-row right-angle header with a 4.2mm pitch, used in wire-to-board applications. Finding a compatible alternative requires matching the mounting style and mechanical footprint.
Mechanical footprint must be verified via datasheet comparison.
Candidate ratings are typical for this style, but should be checked against application requirements.
No drop-in replacement is confirmed without a mechanical drawing comparison. ZX-5557-4.2-2-2PWZ is a strong form-fit-function candidate that requires engineering review.
ZX-5557-4.2-2-2PWZ appears to be the most direct path, matching all key form-factor attributes.
Mechanical footprint mismatch is the primary risk. Even with the same pitch and pin count, housing dimensions can vary.

MEGASTAR
A 4-pin, 2-row, 4.2mm pitch right-angle header from MEGASTAR, potentially compatible with DLL-5566-4A.
| Feature / factor | DLL-5566-4A | ZX-5557-4.2-2-2PWZ | HC-5557-4.2-2x2AW | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle — Mounting orientation matches target.; HC-5557-4.2-2x2AW: Mounting orientation matches target. | |
| Pitch | 4.2mm | 4.2mm | 4.2mm | 4.2mm — matched; HC-5557-4.2-2x2AW: matched | |
| Pinout | 4 pos, 2 rows | 4 pos, 2 rows | 4 pos, 2 rows (inferred) | 4 pos, 2 rows / 4 pos, 2 rows (inferred) — matched; HC-5557-4.2-2x2AW: Row count inferred from summary, not in specs. | |
| Current | Not specified | 5A | 7A | 5A / 7A — Target current rating not specified.; HC-5557-4.2-2x2AW: Likely an upgrade, verify application needs. | |
| Application | Phosphor Bronze | Copper Alloy | Brass | Copper Alloy / Brass — May affect durability and plating.; HC-5557-4.2-2x2AW: May affect durability. |
ZX-5557-4.2-2-2PWZ by MEGASTAR is a strong candidate, offering the same right-angle form factor, pin count, and pitch. However, users should verify mechanical drawings before substitution.