Is there a pin-compatible replacement for DLW32SH510XK2L?

While parts like Murata's DLW32MH series share the 1210 4-pin package, they are not electrically equivalent. Their lower current and voltage ratings make them unsuitable as direct pin-compatible replacements without significant design review and likely circuit modification.

What risks should I check before replacing DLW32SH510XK2L?

Key risks include lower current rating (overheating, failure), lower voltage rating (breakdown), and different inductance/DCR (altered filter performance, higher power losses). Always verify these critical parameters in your specific application before substituting.

DLW32SH510XK2L Alternatives, Datasheet & Cross Reference | Murata Manufacturing Co., Ltd.

DLW32SH510XK2L is a 51µH, 200mA AEC-Q200 common mode choke from Murata in a 1210 package. Finding a suitable replacement requires carefully matching its relatively high current and voltage ratings for its size.

AI replacement insight

Electrical riskhigh

Candidates have much lower current/voltage ratings and different inductance, requiring complete circuit re-evaluation.

Package risklow

Several alternatives exist in the same 1210 4-pin package, but pinout function must be confirmed.

Can it be replaced directly?

No direct, drop-in replacement is currently identified. All candidates found have significant electrical downgrades in current and voltage.

Best replacement path

Search for AEC-Q200 common mode chokes in a 1210 package with ≥51µH inductance, ≥200mA current, and ≥80V voltage.

Main risk

The primary risk is substituting with a part that has a lower current rating, which could lead to component overheating, failure, and system malfunction.

Recommended alternatives

A form-fit compatible choke, but with much lower current/voltage ratings and different inductance requiring full design validation.

View details

Alternative comparison matrix

Feature / factor	DLW32SH510XK2L	DLW32MH101XK2L	DLW32MH101XT2L	Compatibility / risk
Package	1210 (3225 metric)	1210 (3225 metric)	1210 (3225 metric)	1210 (3225 metric) — Form factor is compatible.; DLW32MH101XT2L: Form factor is compatible.
Current	200 mA	100 mA	100 mA	100 mA — Candidate current rating is 50% lower.; DLW32MH101XT2L: Candidate current rating is 50% lower.
Voltage	80 VDC	50 V	50 V	50 V — Candidate voltage rating is significantly lower.; DLW32MH101XT2L: Candidate voltage rating is significantly lower.
Inductance	51 uH	100 µH	100 µH	100 µH — Significantly higher inductance will alter filter characteristics.; DLW32MH101XT2L: Significantly higher inductance.
Dcr	0.7 Ohm max	2.8 Ω	-	2.8 Ω — Higher DCR increases power loss.

Application & sourcing insights

Questions & answers

Currently, no direct drop-in replacements have been identified. Alternatives like the Murata DLW32MH series have the same package but significantly lower current and voltage ratings, requiring careful circuit analysis before use.