Is there a pin-compatible replacement for EMZR500ARA221MHA0G?

No substitute has been confirmed as a 100% pin-compatible replacement without engineering review. VP1H221M0810 is a strong candidate for form-fit-function compatibility, but its land pattern and electrical specs like ESR must be checked against your design requirements.

What risks should I check before replacing EMZR500ARA221MHA0G?

Before replacing, check three main risks: 1) Package Mismatch: Ensure the substitute's dimensions (e.g., 10x10mm vs 8x10mm) fit your PCB. 2) Electrical Downgrades: Verify the substitute's ESR and ripple current are not worse than the original. 3) Lifetime: Ensure the endurance rating (e.g., 2000 hours @ 105°C) is sufficient for your application.

EMZR500ARA221MHA0G Alternatives, Datasheet & Cross Reference | NCC(Nippon Chemi-Con)

Finding a substitute for the NCC EMZR500ARA221MHA0G, a 220µF 50V 8x10mm aluminum electrolytic capacitor, requires careful attention to package size and key electricals like ESR and ripple current. While several parts offer similar capacitance and voltage, physical compatibility is the main challenge.

AI replacement insight

Package riskhigh

Most alternatives are 10mm diameter vs target's 8mm, requiring a board redesign.

Electrical riskmedium

Substitutes may have higher ESR or lower ripple current, affecting circuit stability and component life.

Can it be replaced directly?

No confirmed drop-in replacement exists. VP1H221M0810 is the closest form-fit candidate, but requires electrical verification. All other options require a PCB layout change.

Best replacement path

The most promising substitute is VP1H221M0810 due to its nearly identical package size (8x10.2mm). However, you must verify its ESR and ripple current from the datasheet to ensure it meets your application's needs.

Main risk

The primary risk is physical incompatibility due to package size. Most alternatives are larger. The secondary risk is electrical downgrade from higher ESR or lower ripple current ratings.

Recommended alternatives

A potential form-fit alternative with a very similar package size; requires electrical verification.

View details

Alternative comparison matrix

Feature / factor	EMZR500ARA221MHA0G	VP1H221M0810	UUD1H221MNL1GS	Compatibility / risk
Package	8mm x 10mm	8mm x 10.2mm	10x10mm	8mm x 10.2mm / 10x10mm — Very close match, likely compatible. Height differs by +0.2mm.; UUD1H221MNL1GS: Larger diameter, will not fit on original footprint.
Voltage	50V	50V	50V	50V — matched; UUD1H221MNL1GS: matched
Capacitance	220µF	220µF	-	220µF — matched
Esr	0.12 Ω	Unknown	0.18 Ω	Unknown / 0.18 Ω — Must be verified from datasheet.; UUD1H221MNL1GS: Higher ESR may affect performance.
Ripple Current	900 mA	Unknown	670 mA	Unknown / 670 mA — Must be verified from datasheet.; UUD1H221MNL1GS: Lower ripple rating is a significant downgrade.

Application & sourcing insights

Questions & answers

The best alternative is likely VP1H221M0810 by HONOR, as its 8x10.2mm package is the closest match to the target's 8x10mm size. However, you must verify its ESR and ripple current ratings from the datasheet before use.