Is there a pin-compatible replacement for ERA6AEB182V?

Yes, many 0805 chip resistors are pin-compatible. However, for the ERA6AEB182V, electrical characteristics like tolerance (±0.1%) and TCR (±25 ppm/°C) are critical. A replacement must be verified for these parameters to ensure circuit performance.

What risks should I check before replacing ERA6AEB182V?

The main risks are performance degradation due to wider tolerance, temperature instability from a higher TCR, and potential long-term reliability issues if the replacement is not AEC-Q200 qualified. Always verify the replacement's specs against your circuit's requirements.

ERA6AEB182V Alternatives, Datasheet & Cross Reference | PANASONIC

The Panasonic ERA6AEB182V is a high-precision, AEC-Q200 qualified thin film resistor. Finding a direct replacement requires matching its tight tolerance (±0.1%) and low temperature coefficient (±25 ppm/°C).

AI replacement insight

Electrical riskhigh

Mismatched tolerance, TCR, and technology will degrade circuit precision and stability.

Package risklow

All candidates use the same standard 0805 package.

Sourcing riskmedium

High-precision components can have more limited availability than general-purpose ones.

Can it be replaced directly?

No direct, verified drop-in replacements are presented. All candidates are parametrically relaxed and require engineering validation.

Best replacement path

Search for thin film, 0805, 1.8kΩ resistors with tolerance ≤0.1% and TCR ≤25 ppm/°C, preferably with AEC-Q200 qualification.

Main risk

The primary risk is substituting a high-precision thin film resistor with a general-purpose thick film part, leading to loss of accuracy and temperature stability.

Recommended alternatives

A form-fit compatible 1.8kΩ resistor with wider tolerance and higher TCR; requires engineering review.

View details

Alternative comparison matrix

Feature / factor	ERA6AEB182V	FRC0805F1801TS	RS-05K1801FT	Compatibility / risk
Package	0805 (2012 Metric)	0805	0805	0805 — Form factor matches.; RS-05K1801FT: Form factor matches.
Resistance	1.8kΩ	1.8kΩ	1.8kΩ	1.8kΩ — Nominal resistance matches.; RS-05K1801FT: Nominal resistance matches.
Tolerance	±0.1%	±1%	±1%	±1% — Significantly wider tolerance.; RS-05K1801FT: Significantly wider tolerance.
Tcr	±25 ppm/°C	±100 ppm/°C	±100ppm/℃	±100 ppm/°C / ±100ppm/℃ — Significantly higher temperature drift.; RS-05K1801FT: Significantly higher temperature drift.
Technology	Thin Film	Thick Film	Thick Film	Thick Film — Different technology, affects stability.; RS-05K1801FT: Different technology, affects stability.

Application & sourcing insights

Questions & answers

The best alternative is another thin film resistor with 1.8kΩ resistance, 0805 package, ±0.1% tolerance, and a TCR of ±25 ppm/°C or better. Candidates with looser parameters require careful engineering review.