Is there a pin-compatible replacement for ERJ2RKF6041X?

Yes, several 0402 package resistors match the 6.04kΩ resistance. However, many common alternatives have a lower power rating of 0.0625W compared to the target's 0.1W. This power difference must be verified for your application.

What risks should I check before replacing ERJ2RKF6041X?

The primary risk is the lower power rating of many alternatives (0.0625W vs 0.1W), which could lead to overheating. Also, verify the replacement has AEC-Q200 qualification if used in an automotive application.

ERJ2RKF6041X Alternatives, Datasheet & Cross Reference | PANASONIC

ERJ2RKF6041X is a 6.04kΩ, 1%, 0.1W, 0402 thick film chip resistor with AEC-Q200 qualification. Finding a direct replacement requires matching these key parameters, especially power rating and qualification.

AI replacement insight

Electrical riskhigh

Power rating downgrade from 0.1W to 0.0625W can cause overheating if not properly derated.

Package risklow

All viable candidates match the 0402 package.

Can it be replaced directly?

No direct 1:1 replacement was found that matches all key parameters. All viable candidates have a lower power rating, requiring careful review.

Best replacement path

AT0402DRD076K04L offers upgraded precision but requires verifying the lower power rating is acceptable.

Main risk

Power rating downgrade from 0.1W to 0.0625W is the most critical risk.

Recommended alternatives

AEC-Q200 qualified alternative with higher precision, but a lower power rating that requires engineering validation.

View details

Alternative comparison matrix

Feature / factor	ERJ2RKF6041X	AT0402DRD076K04L	FRC0402F6041TS	Compatibility / risk
Power	0.1W	0.0625W	0.0625W	0.0625W — Significant downgrade, requires derating analysis.; FRC0402F6041TS: Significant downgrade, requires derating analysis.
Tcr	±100 ppm/°C	±25 ppm/°C	-	±25 ppm/°C — Higher precision.
Tolerance	±1%	±0.5%	±1%	±0.5% / ±1% — Higher precision.; FRC0402F6041TS: matched
Application	AEC-Q200	AEC-Q200	None	AEC-Q200 / None — matched; FRC0402F6041TS: Lacks AEC-Q200 qualification.
Technology	Thick Film	Thin Film	-	Thin Film — May affect stability/noise.
Resistance	6.04kΩ	-	6.04kΩ	6.04kΩ — matched
Package	0402	-	0402	0402 — matched

Application & sourcing insights

Questions & answers

AT0402DRD076K04L is a strong candidate with better tolerance and TCR, but has a lower power rating (0.0625W vs 0.1W). Both it and FRC0402F6041TS require engineering review due to the power difference.