What risks should I check before replacing ERR1VM101E11OT?

Before replacing, first check the package type to ensure it's a radial part with 6.3x11mm dimensions. Second, verify the electrical parameters: voltage must be 35V or higher, and capacitance must be 100µF. Finally, for reliability, compare the ripple current and ESR ratings to ensure they meet or exceed the original part's performance.

ERR1VM101E11OT Alternatives, Datasheet & Cross Reference | AISHI

Find substitutes for the AISHI ERR1VM101E11OT, a 100µF 35V radial electrolytic capacitor. This page lists pin-compatible replacements and functional alternatives, with engineering analysis to help you choose the right part.

AI replacement insight

Electrical risklow

For pin-compatible options, electrical risk is low but ESR/ripple current must be verified.

Package riskhigh

Many functional alternatives are SMD and require a board redesign. This is the most common issue.

Sourcing risklow

This is a common capacitor value with multiple manufacturers, so sourcing is generally not difficult.

Can it be replaced directly?

Direct replacement for ERR1VM101E11OT should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.

Best replacement path

Start with Datasheet verified or Strong match candidates for ERR1VM101E11OT, then review parametric alternatives for package and electrical fit.

Main risk

The primary risk when substituting is a mismatch in package type (radial vs. SMD) or a downgrade in performance parameters like ripple current handling or ESR, which can affect circuit stability and component life.

Recommended alternatives

A strong pin-compatible candidate, likely a variant of the same part, with an upgraded lifetime.

View details

Alternative comparison matrix

Feature / factor	ERR1VM101E11OT	35YXJ100MFFC6.3X11	35YXJ100MFFCT1(6.3X11)	Compatibility / risk
Package	Radial, 6.3mm x 11mm	Radial, 6.3mm x 11mm	Radial, 6.3mm x 11mm	Radial, 6.3mm x 11mm — Package dimensions and lead style match.; 35YXJ100MFFCT1(6.3X11): Package dimensions and lead style match.
Voltage	35V	35V	35V	35V — Voltage rating is identical.; 35YXJ100MFFCT1(6.3X11): Voltage rating is identical.
Capacitance	100µF	100µF	100µF	100µF — Capacitance is identical.; 35YXJ100MFFCT1(6.3X11): Capacitance is identical.
Lifetime	2000h @ 105°C	4000-10000h @ 105°C	4000-10000h @ 105°C	4000-10000h @ 105°C — Candidate offers significantly longer operational life.; 35YXJ100MFFCT1(6.3X11): Candidate offers significantly longer operational life.
Ripple Current	Not specified	-	640mA @ 100kHz	640mA @ 100kHz — Target ripple current not specified; must be verified against application needs.

Application & sourcing insights

Questions & answers

Verified drop-in options for ERR1VM101E11OT are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.