Is there a pin-compatible replacement for ESDA6V1-5W6-TP?

Yes, several parts like LESDA6V1W6T1G and SMF05C use the same SOT-363 package and are likely pin-compatible. However, their electrical characteristics, especially surge protection ratings, are significantly weaker than the original part.

What risks should I check before replacing ESDA6V1-5W6-TP?

The primary risks are electrical. You must verify the substitute's Peak Pulse Power (Ppk) and Peak Pulse Current (Ipp) meet your system's requirements. The target is rated for 180W/11A, and most alternatives are much lower. Also check capacitance for high-speed lines.

ESDA6V1-5W6-TP Alternatives, Datasheet & Cross Reference | TECH PUBLIC

ESDA6V1-5W6-TP is a 5-line, 5V uni-directional TVS diode in a SOT-363 package, offering robust 180W peak power protection. Finding a direct drop-in replacement requires careful matching of surge ratings.

AI replacement insight

Electrical riskhigh

Substitutes have 45-67% lower peak power ratings.

Package risklow

SOT-363 is a standard package with compatible candidates available.

Can it be replaced directly?

There are no direct, verified drop-in replacements for ESDA6V1-5W6-TP. All potential candidates have lower surge protection capabilities.

Best replacement path

No direct drop-in replacements found. Alternatives like LESDA6V1W6T1G have significantly lower power ratings, requiring careful engineering review.

Main risk

The main risk is using a substitute with a lower Peak Pulse Power (Ppk) rating, which could lead to device failure under surge conditions.

Recommended alternatives

Form and function match, but with a much lower power rating, this is a high-risk downgrade that requires engineering validation.

View details

Alternative comparison matrix

Feature / factor	ESDA6V1-5W6-TP	LESDA6V1W6T1G	SMF05C	Compatibility / risk
Package	SOT-363	SOT-363	SOT-363	SOT-363 — Same package and pin count.; SMF05C: Same package and pin count.
Voltage	5V	5V (compatible)	5V	5V (compatible) — Candidate breakdown voltage is compatible with target's 5V working voltage.; SMF05C: Reverse stand-off voltage matches.
Power	180W	100W	60W	100W / 60W — Significant downgrade in peak power handling.; SMF05C: Substantial downgrade in peak power handling.
Capacitance	Not specified	50 pF	-	50 pF — Capacitance is significantly higher, may affect high-speed signals. Target C not specified.
Current	11A	-	5A	5A — Peak pulse current is less than half of target's rating.

Application & sourcing insights

Questions & answers

Currently, no direct 1:1 alternative exists. Parts like LESDA6V1W6T1G match the channel count and voltage but have a lower power rating (100W vs 180W). This is a downgrade and requires careful evaluation for your application.