
Shenzhen CJiang Technology Co., Ltd.
Same package and family, but with lower inductance and impedance that must be validated.
FACT4532-101-2P-T is an AEC-Q200 qualified 100uH common mode choke in an 1812 package for signal and power line filtering. Finding a direct replacement requires careful matching of its package, inductance, and impedance characteristics.
Some alternatives are in different physical packages (e.g., 1210 vs 1812).
Some same-package alternatives have significantly lower inductance and impedance.
Direct replacement for FACT4532-101-2P-T should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Search for 100uH common mode chokes in an 1812 (4532 metric) package with ≥150mA current, ≥2kΩ impedance at 10MHz, and AEC-Q200 qualification.
The primary risks are package mismatch requiring a board redesign, or electrical mismatch (lower inductance/impedance) causing inadequate noise filtering.

Shenzhen CJiang Technology Co., Ltd.
Same package and family, but with lower inductance and impedance that must be validated.
| Feature / factor | FACT4532-101-2P-T | FACT4532-510-2P-T | PSCIAQ3225-101Z | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 4532 (1812 Metric) | 4532 (1812 Metric) | 1210 | 4532 (1812 Metric) / 1210 — Same package family.; PSCIAQ3225-101Z: Candidate is smaller, requires layout change. | |
| Inductance | 100uH | 51uH | 100uH | 51uH / 100uH — Significantly lower inductance.; PSCIAQ3225-101Z: Matches target value. | |
| Impedance | 2000Ω min | 1000Ω min | - | 1000Ω min — Lower impedance at 10MHz. | |
| Current | 150mA | 200mA | 150mA | 200mA / 150mA — Higher current rating.; PSCIAQ3225-101Z: Matches target current rating. | |
| Dcr | 2.0Ω | 1.0Ω | 1.5Ω | 1.0Ω / 1.5Ω — Lower DCR is generally better.; PSCIAQ3225-101Z: Lower DCR is generally better. | |
| Voltage | 50V | - | 80V | 80V — Higher voltage rating provides more margin. |
Verified drop-in options for FACT4532-101-2P-T are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.