ProjectsPricingInsights

Best Alternatives to FCC0402N180J500AT

Package: 0402 (1005 Metric)FOJANCeramic CapacitorsCapacitance: 18 pFTolerance: ±5%Rated Voltage: 50 VDielectric: C0G (NP0)Package / Case: 0402 (1005 Metric)

Find and evaluate alternatives for the FOJAN FCC0402N180J500AT, an 18pF 50V C0G 0402 ceramic capacitor. This page analyzes parametric alternatives and highlights key differences for engineering review.

AI replacement insight

Electrical riskmedium

Capacitance difference requires circuit analysis.

Package risklow

Package and pinout are standard 0402.

Sourcing risklow

Alternatives are from major manufacturers.

Can it be replaced directly?

No exact drop-in replacement for FCC0402N180J500AT was found in this analysis. All suitable alternatives have different capacitance values and require engineering review.

Best replacement path

Use a parametrically similar part with a close capacitance value, such as 15pF or 20pF, after verifying circuit tolerance.

Main risk

The primary risk is circuit malfunction due to capacitance mismatch, which can affect timing, filtering, or impedance matching.

Recommended alternatives

2
CL05C150JB5NNNC package
CL05C150JB5NNNC

Samsung Electro-Mechanics

Needs validationmedium risk

A 15pF capacitor in the same package. Verify circuit tolerance to the lower capacitance value.

View details

Alternative comparison matrix

Feature / factorFCC0402N180J500ATCL05C150JB5NNNCTCC0402COG200J500ATAlt 3Compatibility / risk
Package0402 (1005 Metric)0402 (1005 Metric)-0402 — Same package size and pin count.
Capacitance18 pF15 pF-20 pF — Capacitance is 11% higher. Requires circuit analysis.
Voltage50 V50 V-50 V — Voltage rating matches.
Tolerance±5%±5%-±5% — Tolerance matches.
DielectricC0G (NP0)C0G (NP0)-COG — COG is equivalent to C0G (NP0).
LifecycleActive-ActiveActive — Both parts are active.

Application & sourcing insights

Questions & answers

The best alternatives are parametrically similar parts like CL05C150JB5NNNC (15pF) or TCC0402COG200J500AT (20pF). However, you must verify if your circuit can tolerate this change in capacitance.