Is there a pin-compatible replacement for FEXL0660A-4R7M?

No. Among the candidates reviewed, none are pin-compatible with FEXL0660A-4R7M. All functional alternatives have different package dimensions, which means they cannot be dropped onto the same PCB land pattern.

What risks should I check before replacing FEXL0660A-4R7M?

The main risk is the physical package mismatch, which requires a PCB redesign. You must verify the new component's footprint and ensure adequate board space. For some alternatives like FXL0840-4R7-M, you must also analyze the impact of higher DCR on circuit efficiency and thermal performance.

FEXL0660A-4R7M Alternatives, Datasheet & Cross Reference | Shenzhen CJiang Technology Co., Ltd.

FEXL0660A-4R7M is a 4.7µH molded power inductor in a compact 6.6mm x 6.4mm package, designed for high-current power supplies. Finding a replacement requires careful consideration of physical dimensions and electrical parameters.

AI replacement insight

Package riskhigh

All functional alternatives are physically larger and require a board redesign.

Electrical risklow

Most alternatives offer superior or similar electrical performance, but FXL0840-4R7-M has a higher DCR that needs evaluation.

Sourcing risklow

Alternatives are from the same manufacturer, suggesting similar supply chain characteristics.

Can it be replaced directly?

No, there are no direct, pin-compatible replacements for FEXL0660A-4R7M among the candidates reviewed. All viable alternatives have different package sizes.

Best replacement path

No drop-in replacement was found. The best path is a board redesign using a functional alternative like FXL1050-4R7-M, which offers superior current ratings in a larger package.

Main risk

The primary risk is the physical package mismatch. All functional alternatives require a new PCB layout to accommodate their larger footprints.

Recommended alternatives

A functional alternative with higher current ratings but a larger, non-compatible package.

View details

Alternative comparison matrix

Feature / factor	FEXL0660A-4R7M	FXL1050-4R7-M	FXL1350-4R7-M	FXL0840-4R7-M	Compatibility / risk
Package	SMD, 6.6mm x 6.4mm	10x11.5mm	SMD, 13.45mm x 12.6mm	SMD, 8.8x8.2mm	10x11.5mm / SMD, 13.45mm x 12.6mm / SMD, 8.8x8.2mm — Candidate is larger, requires board redesign.; FXL1350-4R7-M: Candidate is significantly larger, requires board redesign.; FXL0840-4R7-M: Candidate is larger, requires board redesign.
Inductance H	4.7µH	4.7µH	4.7µH	4.7µH	4.7µH — matched; FXL1350-4R7-M: matched; FXL0840-4R7-M: matched
Current A	8.5A	11.0A	13.0A	9.5A	11.0A / 13.0A / 9.5A — Higher current rating offers more thermal margin.; FXL1350-4R7-M: Higher current rating offers more thermal margin.; FXL0840-4R7-M: Slightly higher current rating.
Saturation Current A	10.5A	15.0A	21.0A	-	15.0A / 21.0A — Higher saturation current.; FXL1350-4R7-M: Higher saturation current prevents inductance drop at peak loads.
Dcr Ohm	14.4mΩ	14.0mΩ	9.0mΩ	26.5mΩ	14.0mΩ / 9.0mΩ / 26.5mΩ — DCR is nearly identical.; FXL1350-4R7-M: Lower DCR improves efficiency.; FXL0840-4R7-M: Significantly higher DCR will increase power loss and heat.

Application & sourcing insights

Questions & answers

No direct drop-in replacement was found. The best functional alternative is FXL1050-4R7-M, which offers an upgrade in current handling, but it requires a board redesign due to its larger package (10x11.5mm vs 6.6x6.4mm).