
KOHERELEC
A form-fit alternate with superior current ratings and lower DCR, but a different inductance value (4.7µH) that requires circuit validation.
Find and compare alternatives for the FHC1050-5R5M, a 5.5µH power inductor in a 1050 package. This guide analyzes substitutes based on critical parameters like current rating, DCR, and physical compatibility.
Candidates have different inductance, current ratings, or DCR, requiring circuit validation.
Candidates share the same 1050 package, ensuring physical compatibility.
Alternatives are from active manufacturers, but regional availability should be checked.
No direct drop-in replacement has been verified. Alternatives share the same package but have different electrical parameters requiring review.
MDA1050-4R7M offers superior current ratings and lower DCR but has a lower inductance (4.7µH vs 5.5µH), requiring circuit analysis.
The main risks are changes in inductance affecting circuit stability, or lower current ratings and higher DCR causing overheating and efficiency loss.

KOHERELEC
A form-fit alternate with superior current ratings and lower DCR, but a different inductance value (4.7µH) that requires circuit validation.
| Feature / factor | FHC1050-5R5M | MDA1050-4R7M | SMMS1050-5R6M | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 1050 | 1050 | 1050 | 1050 — Same package dimensions.; SMMS1050-5R6M: Same package dimensions. | |
| Inductance | 5.5 µH | 4.7 µH | 5.6 µH | 4.7 µH / 5.6 µH — Lower inductance may affect circuit stability/ripple.; SMMS1050-5R6M: Very close match, within tolerance. | |
| Saturation Current A | 12.0 A | 16.0 A | 13.0 A | 16.0 A / 13.0 A — Higher saturation current provides more margin.; SMMS1050-5R6M: Slightly higher saturation current. | |
| Current A | 10.0 A | 15.0 A | 8.5 A | 15.0 A / 8.5 A — Significantly higher RMS current rating.; SMMS1050-5R6M: Lower RMS current rating is a downgrade risk. | |
| Dcr Ohm | 10.3 mΩ | 9.3 mΩ | 18.9 mΩ | 9.3 mΩ / 18.9 mΩ — Lower DCR improves efficiency.; SMMS1050-5R6M: Significantly higher DCR will reduce efficiency. |
The best potential alternative is MDA1050-4R7M, which offers higher current ratings and lower DCR. However, its inductance is lower at 4.7µH, so you must verify it is suitable for your circuit's stability and ripple requirements.