
Murata Electronics
A 10µH inductor in the same 0805 package with higher current rating and lower DCR, but with a wider ±20% tolerance.
FHW0805UF100JST is a general-purpose 10µH wire-wound inductor in a standard 0805 package, notable for its ±5% tolerance. When seeking replacements, key considerations include matching this tolerance, package size, and verifying current requirements.
Most alternatives have relaxed inductance tolerance.
Multiple same-package alternatives exist, but functional alternates require redesign.
10µH 0805 inductors are a common component type from many vendors.
No direct drop-in replacement with identical ±5% tolerance was found. Several 0805 parts like LQM21DH100M70L offer similar or better electricals but with a relaxed tolerance of ±10% or ±20%.
For a near drop-in, prioritize 0805 candidates like LBR2012T100K, but verify the relaxed ±10% tolerance is acceptable. If a layout change is possible, functional alternates offer higher performance.
The primary risk is the inductance tolerance mismatch; the target's ±5% is tighter than most alternatives (±10% to ±20%), which can impact the performance of sensitive circuits like filters.

Murata Electronics
A 10µH inductor in the same 0805 package with higher current rating and lower DCR, but with a wider ±20% tolerance.
| Feature / factor | FHW0805UF100JST | LQM21DH100M70L | CMP201209XD100KT | VLS3012CX-100M-1 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0805 | 0805 (2012 Metric) | 0805 | 3030 (1212 Metric) | 0805 (2012 Metric) / 3030 (1212 Metric) / 2016 (0806 Metric) — Package matches.; CMP201209XD100KT: Package matches.; VLS3012CX-100M-1: Package is much larger, requires layout change.; WPN201610H100MT: Package does not match, requires layout change. |
| Inductance | 10 µH | 10 µH | - | 10 µH | 10 µH — Inductance matches.; VLS3012CX-100M-1: Inductance matches.; WPN201610H100MT: Inductance matches. |
| Tolerance | ±5% | ±20% | ±10% | - | ±20% / ±10% — Tolerance is worse, may affect circuit tuning.; CMP201209XD100KT: Tolerance is worse. |
| Current | 150 mA | 250 mA | 250 mA | 1.0 A | 250 mA / 1.0 A / 800 mA — Higher current rating is an upgrade.; CMP201209XD100KT: Higher current rating.; VLS3012CX-100M-1: Significantly higher current rating.; WPN201610H100MT: Significantly higher current rating. |
| Dcr | 3.2 Ω | 0.845 Ω | 0.56 Ω | 0.324 Ω | 0.845 Ω / 0.56 Ω / 0.324 Ω / 0.688 Ω — Lower DCR improves efficiency.; CMP201209XD100KT: Lower DCR improves efficiency.; VLS3012CX-100M-1: Significantly lower DCR is an improvement.; WPN201610H100MT: Lower DCR is an improvement. |
| Construction | Wire-wound | - | Multilayer | - | Multilayer — Different construction may affect Q-factor. |
The best alternative depends on your priority. For form-fit, LBR2012T100K is a strong choice with better DCR, but has a ±10% tolerance. For higher current handling, LQM21DH100M70L is suitable but has a ±20% tolerance. Always verify tolerance impact.