
XUNPU
A 30-pin, 0.5mm pitch FPC connector from the same manufacturer, but with bottom contacts instead of dual.
FPC-05FB-30PH20 is a 30-pin, 0.5mm pitch FPC connector from XUNPU, featuring a dual-contact design for flexible cable insertion. Finding a direct replacement requires matching the footprint, pitch, and dual-contact functionality.
Footprint and height may vary between series and manufacturers.
Voltage/current ratings are often standard, but must be checked.
FPC connectors are a common category with many vendors.
No, a direct, drop-in replacement for FPC-05FB-30PH20 is not confirmed. All candidates require engineering review due to differences in contact type or mechanical features.
The most promising path is evaluating FPC-05F-30PH15, a variant from the same manufacturer, but you must confirm your FPC cable works with its bottom-contact design.
The primary risk is the contact type mismatch. The target has dual contacts, while alternatives may have only top or bottom contacts, potentially causing connection failure.

XUNPU
A 30-pin, 0.5mm pitch FPC connector from the same manufacturer, but with bottom contacts instead of dual.
| Feature / factor | FPC-05FB-30PH20 | FPC-05F-30PH15 | 524353071 | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Pin Count | 30 | 30 | 30 | 30 — matched; 524353071: matched | |
| Pitch | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm — matched; 524353071: matched | |
| Contact Type | Dual (Top/Bottom) | Bottom | Top Contact | Bottom / Top Contact — Target has dual contacts, candidate has bottom only.; 524353071: Target has dual contacts, candidate has top only. | |
| Current | 0.5 A | 0.5 A | - | 0.5 A — matched | |
| Voltage | 50 V | 50 V | - | 50 V — matched | |
| Manufacturer | XUNPU | - | MOLEX | MOLEX — different | |
| Locking Mechanism | Flip-lock | - | ZIF | ZIF — Actuator style may differ from target's flip-lock. |
FPC-05F-30PH15 from the same manufacturer is a close functional alternative, matching key specs but with bottom-only contacts. A full review of your FPC cable and layout is required.