What risks should I check before replacing FRC0402F1182TS?

When replacing FRC0402F1182TS, check three main risks: 1) Resistance Mismatch: Ensure the alternative's nominal resistance is within your circuit's tolerance. 2) TCR Mismatch: Verify the temperature stability, especially for precision applications. 3) Technology Difference: The target is a thick film resistor; thin film alternatives may have different pulse handling characteristics.

FRC0402F1182TS Alternatives, Datasheet & Cross Reference | FOJAN

Find and evaluate replacements for the FRC0402F1182TS, an 11.8kΩ 1% 0402 chip resistor. This page provides analysis of potential pin-compatible and parametric alternatives, highlighting key differences in resistance, tolerance, and TCR to aid your design and sourcing decisions.

AI replacement insight

Electrical riskmedium

Using a part with a different nominal resistance or an unverified TCR can alter circuit behavior.

Package risklow

All reviewed candidates use the same 0402 package, minimizing physical compatibility issues.

Can it be replaced directly?

Direct replacement for FRC0402F1182TS should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.

Best replacement path

The most promising replacement is 0402WGF1182TCE, which matches all primary electrical and physical parameters. However, its Temperature Coefficient of Resistance (TCR) must be confirmed from the datasheet to ensure it meets the application's stability requirements.

Main risk

The main risk is substituting with a part that has a different nominal resistance without analyzing the impact on circuit performance. For precision applications, even small deviations can be critical.

Recommended alternatives

A potential pin-compatible replacement with matching resistance, tolerance, and package; requires TCR verification.

View details

Alternative comparison matrix

Feature / factor	FRC0402F1182TS	0402WGF1182TCE	RT0402BRD0712KL	Compatibility / risk
Resistance	11.8 kΩ	11.8 kΩ	12.0 kΩ	11.8 kΩ / 12.0 kΩ — Exact nominal resistance match.; RT0402BRD0712KL: Resistance is +1.7% higher than target; requires circuit validation.
Tolerance	±1%	±1%	±0.1%	±1% / ±0.1% — Tolerance matches the target.; RT0402BRD0712KL: Tolerance is tighter than target.
Power	1/16 W	1/16 W	-	1/16 W — Power rating matches the target.
Package	0402	0402	0402	0402 — Package size is identical.; RT0402BRD0712KL: Package size is identical.
Tcr	±100 ppm/°C	Unknown	25 ppm/°C	Unknown / 25 ppm/°C — Candidate TCR is not specified in provided data; must be verified from datasheet.; RT0402BRD0712KL: TCR is significantly better (more stable) than target.
Technology	Thick Film	-	Thin Film	Thin Film — Different technology may affect pulse handling or cost.

Application & sourcing insights

Questions & answers

Verified drop-in options for FRC0402F1182TS are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.