Is there a pin-compatible replacement for FRC0402F1963TS?

Yes, all suggested alternatives are in the same 0402 package and have 2 terminals, making them physically pin-compatible for PCB layout. However, their electrical characteristics, specifically resistance, are different and require engineering validation.

What risks should I check before replacing FRC0402F1963TS?

The main risk is the difference in resistance. The target is 196kΩ ±1%, while alternatives range from 178kΩ to 215kΩ. You must verify that your circuit can function correctly with this new resistance value. Some alternatives also use Thin Film technology instead of Thick Film, which could affect performance in specific high-frequency or pulse-load applications.

FRC0402F1963TS Alternatives, Datasheet & Cross Reference | FOJAN

Find and compare alternatives for the FOJAN FRC0402F1963TS, a 196kΩ 1/16W 0402 chip resistor. This guide analyzes parametric alternatives, highlighting differences in resistance, tolerance, and TCR to aid in your selection process.

AI replacement insight

Electrical riskmedium

All candidates have different nominal resistance values. This can affect circuit timing, biasing, or gain.

Package risklow

All candidates share the same 0402 package, ensuring physical compatibility.

Sourcing risklow

Candidates from Yageo are widely available. FOJAN alternatives are from the same manufacturer.

Can it be replaced directly?

No direct, drop-in replacement with the exact 196kΩ resistance value was found. All candidates require a design review to confirm tolerance for a different resistance value.

Best replacement path

For precision applications, RT0402BRE07200KL offers upgraded tolerance and TCR, but requires accepting a +2.04% resistance shift. For a like-for-like technology match, FRC0402F1913TS has a -2.55% resistance shift.

Main risk

The primary risk is the deviation in resistance value, which is outside the target part's ±1% tolerance for all candidates.

Recommended alternatives

A 0402 resistor from the same series with identical specs but a 2.55% lower resistance value (191kΩ).

View details

Alternative comparison matrix

Feature / factor	FRC0402F1963TS	FRC0402F1913TS	RT0402BRD07200KL	RT0402BRE07200KL	Compatibility / risk
Resistance	196 kΩ	191 kΩ	200 kΩ	200 kΩ	191 kΩ / 200 kΩ — Candidate resistance is 2.55% lower, outside target's ±1% tolerance.; RT0402BRD07200KL: Candidate resistance is 2.04% higher, outside target's ±1% tolerance.; RT0402BRE07200KL: Candidate resistance is 2.04% higher, outside target's ±1% tolerance.
Tolerance	±1%	±1%	±0.1%	±0.1%	±1% / ±0.1% — Tolerance is identical to the target.; RT0402BRD07200KL: Candidate has tighter tolerance, which is a performance upgrade.; RT0402BRE07200KL: Candidate has tighter tolerance, which is a performance upgrade.
Tcr	±100 ppm/°C	±100 ppm/°C	25 ppm/°C	±25 ppm/°C	±100 ppm/°C / 25 ppm/°C / ±25 ppm/°C — TCR is identical to the target.; RT0402BRD07200KL: Candidate has a better (lower) Temperature Coefficient of Resistance.; RT0402BRE07200KL: Candidate has a better (lower) Temperature Coefficient of Resistance.
Package	0402	0402	0402	0402	0402 — Package size is identical.; RT0402BRD07200KL: Package size is identical.; RT0402BRE07200KL: Package size is identical, ensuring form and fit compatibility.
Technology	Thick Film	-	-	Thin Film	Thin Film — Thin film generally offers better stability and lower noise than thick film.

Application & sourcing insights

Questions & answers

The best alternative depends on your circuit's tolerance. If a +2% resistance shift is acceptable, RT0402BRE07200KL is a good choice as it offers better tolerance (±0.1%) and TCR (±25ppm/°C). If you need to stay with the same technology, FRC0402F1913TS is an option with a -2.55% resistance shift.