Is there a pin-compatible replacement for FRC0402F3602TS?

Yes, all suggested alternatives share the same 0402 package and are pin-compatible. However, they are not electrically identical, featuring different resistance values or tolerances that require engineering review.

What risks should I check before replacing FRC0402F3602TS?

Before replacing, verify your circuit's sensitivity to resistance changes (e.g., 36kΩ vs 39kΩ) and tolerance (±1% vs ±5%). Also, consider the technology difference (Thick vs. Thin Film) if pulse handling is a concern.

FRC0402F3602TS Alternatives, Datasheet & Cross Reference | FOJAN

FRC0402F3602TS is a 36kΩ, 1% tolerance, 1/16W chip resistor in a standard 0402 package. While no direct drop-in replacements are available, several parametric alternatives exist with slight variations in resistance or tolerance.

AI replacement insight

Electrical riskmedium

Resistance or tolerance mismatch requires circuit analysis.

Package risklow

All candidates share the same 0402 package.

Sourcing risklow

Alternatives are from major, active manufacturers.

Can it be replaced directly?

No direct, 1-to-1 replacement for FRC0402F3602TS has been identified. All reviewed candidates require engineering validation due to differences in resistance or tolerance.

Best replacement path

Select a candidate with a resistance value (e.g., 39kΩ) acceptable for the circuit's design margins. For precision applications, consider Yageo's RT series for tighter tolerance and TCR.

Main risk

The primary risk is parametric deviation. Using a resistor with a different resistance value or a wider tolerance can impact circuit performance, stability, and accuracy.

Recommended alternatives

A 36kΩ 0402 resistor with a wider ±5% tolerance; verify if precision is critical for the application.

View details

Alternative comparison matrix

Feature / factor	FRC0402F3602TS	0402WGJ0363TCE	FRC0402F3922TS	RT0402BRD0739KL	Compatibility / risk
Package	0402	0402	0402	0402	0402 — Same 0402 package ensures form-fit compatibility.; FRC0402F3922TS: Same 0402 package ensures form-fit compatibility.; RT0402BRD0739KL: Same 0402 package ensures form-fit compatibility.
Resistance	36 kΩ	36 kΩ	39.2 kΩ	39 kΩ	36 kΩ / 39.2 kΩ / 39 kΩ — Resistance value matches the target.; FRC0402F3922TS: Resistance is ~9% higher than target.; RT0402BRD0739KL: Resistance is ~8% higher than target.
Tolerance	±1%	±5%	±1%	±0.1%	±5% / ±1% / ±0.1% — Wider tolerance may not be suitable for precision circuits.; FRC0402F3922TS: Tolerance matches the target.; RT0402BRD0739KL: Tighter tolerance offers higher precision.
Power	1/16 W	1/16 W	-	-	1/16 W — Power rating is identical.
Technology	Thick Film	Thick Film	-	Thin Film	Thick Film / Thin Film — Technology matches target's likely type.; RT0402BRD0739KL: Thin film may have different pulse handling vs thick film.
Tcr	±100 ppm/°C	-	±100 ppm/°C	25 ppm/°C	±100 ppm/°C / 25 ppm/°C — Temperature coefficient matches.; RT0402BRD0739KL: Lower TCR provides better stability over temperature.

Application & sourcing insights

Questions & answers

The best alternative depends on your circuit's tolerance for resistance deviation. `FRC0402F3922TS` is a close value from the same manufacturer. For higher precision, `RT0402BRD0739KL` offers better specs but at 39kΩ. If cost is a factor and tolerance is not, `0402WGJ0363TCE` has the same resistance but at ±5%.