
UNI-ROYAL
A strong pin-compatible alternative with identical resistance, tolerance, and package.
FRC0402F4123TS is a 412kΩ, ±1% tolerance, 1/16W thick film chip resistor in a standard 0402 package. This page provides analysis of potential alternatives, including pin-compatible options and parametric variants.
For the pin-to-pin match, risk is low. For parametric alternates, resistance changes require circuit analysis.
All suggested candidates are in the same 0402 package, minimizing layout and assembly risk.
This is a common resistor value and package, with multiple vendors available.
Direct replacement for FRC0402F4123TS should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
The best path is to use 0402WGF4123TCE, which matches all key parameters. For flexibility, several other parts with slightly different resistance values are also available.
The main risk is substituting with a part of a different resistance value without verifying the impact on circuit performance.

UNI-ROYAL
A strong pin-compatible alternative with identical resistance, tolerance, and package.
| Feature / factor | FRC0402F4123TS | 0402WGF4123TCE | RC-02K4023FT | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Resistance | 412kΩ | 412kΩ | 402kΩ | 412kΩ / 402kΩ — Resistance values are identical.; RC-02K4023FT: Resistance is 2.4% lower, but may be within application tolerance. | |
| Tolerance | ±1% | ±1% | ±1% | ±1% — Tolerance ratings are identical.; RC-02K4023FT: Tolerance ratings are identical. | |
| Power | 1/16W | 1/16W | 1/16W | 1/16W — Power ratings are identical.; RC-02K4023FT: Power ratings are identical. | |
| Package | 0402 | 0402 | 0402 | 0402 — Package dimensions are identical.; RC-02K4023FT: Package dimensions are identical. | |
| Tcr | ±100 ppm/°C | Not in catalog | - | Not in catalog — Candidate TCR is missing from catalog data but datasheet shows match (±100 ppm/°C). |
Verified drop-in options for FRC0402F4123TS are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.