
UNI-ROYAL
A potential pin-compatible 0402 resistor with matching resistance, tolerance, and power rating. TCR verification is required.
Find and compare replacements for the FOJAN FRC0402F5232TS, a 52.3kΩ 1% 1/16W 0402 chip resistor. This guide analyzes pin-compatible and parametric alternatives, highlighting key differences in electrical specifications to ensure a reliable substitution.
TCR for the top candidate is unknown. Other candidates have different resistance values.
All viable candidates use the same 0402 package, ensuring form and fit compatibility.
Considered alternatives are from major manufacturers, but regional availability should be checked.
Yes, UNI-ROYAL 0402WGF5232TCE is a potential pin-to-pin replacement. It matches the 0402 package, 52.3kΩ resistance, 1% tolerance, and 1/16W power rating. However, its TCR must be verified to match the target's ±100 ppm/°C.
The strongest candidate is UNI-ROYAL 0402WGF5232TCE, which matches all key parameters except for its Temperature Coefficient of Resistance (TCR), which is unspecified and requires verification.
The primary risk is a mismatch in the Temperature Coefficient of Resistance (TCR), which is critical for applications requiring stable performance over temperature.

UNI-ROYAL
A potential pin-compatible 0402 resistor with matching resistance, tolerance, and power rating. TCR verification is required.
| Feature / factor | FRC0402F5232TS | 0402WGF5232TCE | 0402WGF4752TCE | 0402WGF5362TCE | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0402 | 0402 | - | - | 0402 — Same 0402 package. |
| Resistance | 52.3 kΩ | 52.3 kΩ | - | - | 53.6 kΩ — Resistance is +2.5% higher than target. |
| Tolerance | ±1% | ±1% | - | - | ±1% — Tolerance values match. |
| Power | 1/16 W | 1/16 W | - | - | 1/16 W — Power ratings match. |
| Tcr | ±100 ppm/°C | Not specified | - | - | Not specified — Candidate TCR is missing, must be verified against target's ±100 ppm/°C. |
Verified drop-in options for FRC0402F5232TS are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.