
Walsin Technology Corporation
This Walsin resistor is a strong match with identical package, resistance, and power, plus a superior tolerance.
FRC0402J330 TS is a general-purpose 33Ω ±5% 1/16W thick film resistor in a 0402 package. Finding a substitute involves matching these key parameters while considering tolerance and technology.
Low if matching key specs; medium if changing technology.
The 0402 package is highly standardized.
Availability of specific substitutes should be confirmed.
Direct replacement for FRC0402J330 TS should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
The most straightforward path is to use a thick film resistor with the same or tighter tolerance, like Walsin's WR04X33R0FTL.
The main risk is using a part with different technology (e.g., thin film) without verifying its impact on circuit performance and cost.

Walsin Technology Corporation
This Walsin resistor is a strong match with identical package, resistance, and power, plus a superior tolerance.
| Feature / factor | FRC0402J330 TS | WR04X33R0FTL | RT0402BRD0733RL | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0402 | 0402 (1005 metric) | 0402 | 0402 (1005 metric) — Identical package size.; RT0402BRD0733RL: Identical package size. | |
| Resistance | 33.0 Ω | 33.0 Ω | 33.0 Ω | 33.0 Ω — Resistance value matches.; RT0402BRD0733RL: Resistance value matches. | |
| Tolerance | ±5.0% | ±1.0% | ±0.1% | ±1.0% / ±0.1% — Candidate has tighter tolerance.; RT0402BRD0733RL: Significantly tighter tolerance. | |
| Technology | Thick Film | Thick Film | Thin Film | Thick Film / Thin Film — Same resistor technology.; RT0402BRD0733RL: Upgraded to Thin Film from Thick Film. | |
| Power | 1/16W | 1/16W | - | 1/16W — Power rating matches. | |
| Tcr | Not specified | - | 25 ppm/°C | 25 ppm/°C — Superior temperature stability. |
Verified drop-in options for FRC0402J330 TS are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.