FRC0603F1183TS is a general-purpose 118kΩ, 1%, 0.1W thick film resistor in a standard 0603 package. This page provides verified substitutes and functional alternatives.FRC0603F1183TS is a general-purpose 118kΩ, 1%, 0.1W thick film resistor in a standard 0603 package. This page provides verified substitutes and functional alternatives.
AI replacement insight
Electrical risklow
For pin-compatible parts, risk is minimal. For parametric alternatives, resistance deviation must be verified.
Package risklow
All suggested candidates use the same standard 0603 package, minimizing layout risk.
Can it be replaced directly?
Yes, 0603WAF1183T5E is a direct pin-to-pin replacement for FRC0603F1183TS, matching all critical parameters.
Best replacement path
0603WAF1183T5E from UNI-ROYAL is a pin-compatible replacement with identical key specifications.
Main risk
The main risk is using an alternative with a different resistance value, which requires circuit analysis.
Create a free account to see pin-compatible paths, risk scores, and sourcing notes.
6+
Ranked alternatives for this part
56M+
Electronics components in PartGenie
12,700+
Manufacturers covered in the database
Alternative comparison matrix
Feature / factor
FRC0603F1183TS
0603WAF1183T5E
FRC0603F1103TS
FRC0603F1203TS
Compatibility / risk
Resistance
118 kΩ
118 kΩ
-
-
120 kΩ — Resistance is 1.7% higher than target.
Tolerance
±1%
±1%
-
-
±1% — Tolerance matches target.
Power
0.1 W
0.1 W
-
-
0.1 W — Power rating matches target.
Package
0603
0603
-
-
0603 — Package size matches.
Tcr
±100 ppm/°C
±100 ppm/°C
-
-
±100 ppm/°C — Temperature coefficient matches.
Manufacturer
FOJAN
-
FOJAN
-
FOJAN — Same manufacturer as target.
Application & sourcing insights
Questions & answers
The best alternative is 0603WAF1183T5E from UNI-ROYAL, which matches all key electrical and physical parameters of the FRC0603F1183TS.
Yes, 0603WAF1183T5E is a pin-compatible replacement. Both are 0603 packages with identical 118kΩ resistance, ±1% tolerance, and 0.1W power rating.
For alternatives, primarily check the resistance value. A small deviation (e.g., 120kΩ vs 118kΩ) may be acceptable but requires verification. Always check the full datasheet for secondary parameters.