
UNI-ROYAL
A 226kΩ, 1%, 0.1W resistor in an 0603 package, parametrically identical but requires power dissipation review.
FRC0603F2263TS is a general-purpose 226kΩ, 1%, 0.1W thick film resistor in a standard 0603 package. Finding a suitable replacement involves matching these key parameters while considering application-specific power derating.
Power rating matches but does not provide a conservative safety margin. Requires review.
All suggested alternatives use the same standard 0603 package.
No direct, drop-in replacement can be guaranteed without reviewing the application's power dissipation. 0603WAF2263T5E is the closest parametric match.
Select a candidate with identical or very close resistance (e.g., 0603WAF2263T5E) and perform a power dissipation analysis for the specific application.
Insufficient power handling if the circuit operates near the component's 0.1W limit.

UNI-ROYAL
A 226kΩ, 1%, 0.1W resistor in an 0603 package, parametrically identical but requires power dissipation review.
| Feature / factor | FRC0603F2263TS | 0603WAF2263T5E | FRC0603F2213TS | RC0603FR-07232KL | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0603 | 0603 | 0603 | 0603 | 0603 — Form factor matches.; FRC0603F2213TS: Form factor matches.; RC0603FR-07232KL: Form factor matches. |
| Resistance | 226kΩ | 226kΩ | 221kΩ | 232kΩ | 226kΩ / 221kΩ / 232kΩ — Resistance is identical.; FRC0603F2213TS: Resistance is 2.2% lower.; RC0603FR-07232KL: Resistance is 2.6% higher. |
| Tolerance | ±1% | ±1% | ±1% | ±1% | ±1% — Tolerance matches.; FRC0603F2213TS: Tolerance matches.; RC0603FR-07232KL: Tolerance matches. |
| Power | 0.1W | 0.1W | 0.1W | 0.1W | 0.1W — Power rating matches but may not meet conservative derating rules.; FRC0603F2213TS: Power rating matches but may not meet conservative derating rules.; RC0603FR-07232KL: Power rating matches but may not meet conservative derating rules. |
| Tcr | ±100 ppm/°C | ±100 ppm/°C | - | - | ±100 ppm/°C — Temperature coefficient matches. |
0603WAF2263T5E from UNI-ROYAL is parametrically identical, but requires engineering review to ensure it meets your application's power derating requirements.