
Yageo
Yageo RC0603FR-07430KL is a pin-compatible alternative with identical key specifications.
FRC0603F4303TS is a general-purpose 430kΩ, 1% tolerance, 1/10W thick film chip resistor in a standard 0603 package. This page provides analysis of potential substitutes and cross-references.
Most candidates have very similar electrical parameters. Check resistance value.
All suggested alternatives use the same 0603 package.
Direct replacement for FRC0603F4303TS should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Use Yageo RC0603FR-07430KL for a direct, one-to-one replacement with identical specifications.
The primary risk with most alternatives is a slight deviation in resistance value, which is typically under 3% and acceptable for many non-precision circuits.

Yageo
Yageo RC0603FR-07430KL is a pin-compatible alternative with identical key specifications.
| Feature / factor | FRC0603F4303TS | RC0603FR-07430KL | FRC0603F4223TS | FRH0603D4423TS | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0603 | 0603 | 0603 | 0603 | 0603 — Identical package and pin count.; FRC0603F4223TS: Identical package.; FRH0603D4423TS: Identical package. |
| Resistance | 430 kΩ | 430 kΩ | 422 kΩ | 442 kΩ | 430 kΩ / 422 kΩ / 442 kΩ — Resistance value is identical.; FRC0603F4223TS: Resistance is ~1.9% lower.; FRH0603D4423TS: Resistance is ~2.8% higher. |
| Tolerance | ±1% | ±1% | ±1% | ±0.5% | ±1% / ±0.5% — Tolerance is identical.; FRC0603F4223TS: Tolerance is identical.; FRH0603D4423TS: Tighter tolerance is an upgrade. |
| Power | 1/10 W | 1/10 W | 1/10 W | 1/10 W | 1/10 W — Power rating is identical.; FRC0603F4223TS: Power rating is identical.; FRH0603D4423TS: Power rating is identical. |
| Tcr | ±100 ppm/°C | ±100 ppm/°C | - | - | ±100 ppm/°C — Temperature coefficient is identical. |
Verified drop-in options for FRC0603F4303TS are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.