
FOJAN
Pin-compatible 0603 resistor with close resistance (294kΩ) and upgraded ±1% tolerance.
Find and compare replacements for the FRC0603J304 TS, a 300kΩ 5% 0.1W 0603 thick film resistor. Pin-compatible options with tighter tolerance are available, but require review for circuit compatibility.
Tighter tolerance is usually safe, but verify if the circuit depends on the wider ±5% range. Power and voltage ratings offer no extra margin.
Top candidates share the same 0603 package, ensuring form and fit compatibility.
Direct replacement for FRC0603J304 TS should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Start with Datasheet verified or Strong match candidates for FRC0603J304 TS, then review parametric alternatives for package and electrical fit.
The primary risk is the tighter tolerance (±1% vs ±5%), which may affect circuits designed for a wider resistance range. Power and voltage ratings are not increased.

FOJAN
Pin-compatible 0603 resistor with close resistance (294kΩ) and upgraded ±1% tolerance.
| Feature / factor | FRC0603J304 TS | FRC0603F2943TS | FRC0603F3013TS | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0603 | 0603 | 0603 | 0603 — Package size matches.; FRC0603F3013TS: Package size matches. | |
| Resistance | 300kΩ | 294kΩ | 301kΩ | 294kΩ / 301kΩ — Value is within 2% of target, well within target's ±5% tolerance.; FRC0603F3013TS: Value is within 0.4% of target, well within target's ±5% tolerance. | |
| Tolerance | ±5% | ±1% | ±1% | ±1% — Tighter tolerance is a performance upgrade.; FRC0603F3013TS: Tighter tolerance is a performance upgrade. | |
| Power | 1/10W | 1/10W | 1/10W | 1/10W — Power rating is identical; no additional safety margin.; FRC0603F3013TS: Power rating is identical; no additional safety margin. | |
| Tcr | ±100 ppm/°C | ±100 ppm/°C | ±100 ppm/°C | ±100 ppm/°C — Temperature coefficient matches.; FRC0603F3013TS: Temperature coefficient matches. |
Verified drop-in options for FRC0603J304 TS are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.