
UNI-ROYAL
Strong match with identical package, resistance, tolerance, and power rating.
Find pin-compatible and parametric alternatives for the FRC0805F2101TS, a 2.1kΩ 1/8W 1% 0805 thick film resistor. Review key differences in resistance and power ratings before substitution.
Low for direct matches, Medium for parts with different resistance. User must verify circuit impact.
Low, all candidates are in the same 0805 package.
Low, this is a common resistor value available from multiple vendors.
Direct replacement for FRC0805F2101TS should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Direct replacement with a part matching all key specs, like 0805W8F2101T5E.
The main risk is substituting with a part of a different resistance value, which requires circuit analysis.

UNI-ROYAL
Strong match with identical package, resistance, tolerance, and power rating.
| Feature / factor | FRC0805F2101TS | 0805W8F2101T5E | RS-05K2101FT | 0805W8F1911T5E | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0805 | 0805 | 0805 | 0805 | 0805 — Same EIA package.; RS-05K2101FT: Same EIA package.; 0805W8F1911T5E: Same EIA package.; 0805W8F2211T5E: Same EIA package. |
| Resistance | 2.1 kΩ | 2.1 kΩ | 2.1 kΩ | 1.91 kΩ | 2.1 kΩ / 1.91 kΩ / 2.21 kΩ — Resistance value matches.; RS-05K2101FT: Resistance value matches.; 0805W8F1911T5E: Resistance is ~9% lower. Verify circuit impact.; 0805W8F2211T5E: Resistance is ~5.2% higher. Verify circuit impact. |
| Tolerance | ±1% | ±1% | ±1% | - | ±1% — Tolerance matches.; RS-05K2101FT: Tolerance matches. |
| Power | 0.125 W | 0.125 W | 0.125 W | 0.125 W | 0.125 W — Power rating matches.; RS-05K2101FT: Power rating matches.; 0805W8F1911T5E: Power rating matches.; 0805W8F2211T5E: Power rating matches. |
| Tcr | ±100 ppm/°C | ±100 ppm/°C | - | - | ±100 ppm/°C — Temperature coefficient matches. |
Verified drop-in options for FRC0805F2101TS are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.