
FH (Guangdong Fenghua Advanced Tech)
This FH resistor matches the target's package, resistance, tolerance, and power rating.
Find substitutes for the FRC0805F4703TS, a 470kΩ 1% 0.125W 0805 chip resistor. This guide covers pin-compatible matches and parametric alternatives, highlighting key differences for your design.
Using a part with wider tolerance or different resistance requires analysis.
All suggested alternatives use the standard 0805 package.
This is a common resistor value available from multiple vendors.
Direct replacement for FRC0805F4703TS should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Start with Datasheet verified or Strong match candidates for FRC0805F4703TS, then review parametric alternatives for package and electrical fit.
The main risk is using a substitute with a wider tolerance (e.g., ±5%) or a different nominal resistance, which may affect the precision of your circuit.

FH (Guangdong Fenghua Advanced Tech)
This FH resistor matches the target's package, resistance, tolerance, and power rating.
| Feature / factor | FRC0805F4703TS | RS-05K4703FT | FRC0805J474TS | RC0805FR-07499KL | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0805 | 0805 | 0805 | 0805 | 0805 — Same EIA package code.; FRC0805J474TS: Package matches.; RC0805FR-07499KL: Package matches. |
| Resistance | 470kΩ | 470kΩ | 470kΩ | 499kΩ | 470kΩ / 499kΩ — Nominal resistance matches.; FRC0805J474TS: Resistance matches.; RC0805FR-07499KL: Resistance is ~6% higher than target. |
| Tolerance | ±1% | ±1% | ±5% | ±1% | ±1% / ±5% — Resistance tolerance matches.; FRC0805J474TS: Wider tolerance may affect circuit precision.; RC0805FR-07499KL: Tolerance matches. |
| Power | 0.125W | 0.125W | 0.125W | 0.125W | 0.125W — Power rating matches.; FRC0805J474TS: Power rating matches.; RC0805FR-07499KL: Power rating matches. |
| Tcr | ±100 ppm/°C | ±100ppm/℃ | - | - | ±100ppm/℃ — Temperature coefficient matches. |
Verified drop-in options for FRC0805F4703TS are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.