
UNI-ROYAL
Matches resistance, tolerance, power, and package. TCR is unconfirmed and requires verification.
Find and compare alternatives for the FRC0805F5232TS, a 52.3kΩ 1% 0.125W 0805 thick film resistor. This page provides verified substitutes and parametric alternatives.
Several candidates have different resistance values or technology.
All reviewed candidates share the same 0805 package.
Not applicable for a passive component like a resistor.
Direct replacement for FRC0805F5232TS should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
For a direct replacement, use a part with identical resistance, tolerance, power, and package, like 0805W8F5232T5E, after verifying its TCR. For less sensitive circuits, resistors with nearby values may be acceptable.
The main risk is using a substitute with a different resistance value or an unverified Temperature Coefficient (TCR), which can affect circuit performance.

UNI-ROYAL
Matches resistance, tolerance, power, and package. TCR is unconfirmed and requires verification.
| Feature / factor | FRC0805F5232TS | 0805W8F5232T5E | ARG05BTC5232 | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Resistance | 52.3 kΩ | 52.3 kΩ | 52.3 kΩ | 52.3 kΩ — Exact match.; ARG05BTC5232: Exact match. | |
| Tolerance | ±1% | ±1% | ±0.1% | ±1% / ±0.1% — Exact match.; ARG05BTC5232: Tighter tolerance than target. | |
| Power | 0.125 W | 0.125 W | - | 0.125 W — Exact match. | |
| Package | 0805 | 0805 | 0805 | 0805 — Exact match.; ARG05BTC5232: Exact match. | |
| Tcr | ±100 ppm/°C | Not specified | ±25ppm/°C | Not specified / ±25ppm/°C — Target TCR is ±100 ppm/°C. Candidate TCR must be verified from datasheet.; ARG05BTC5232: Better temperature stability. | |
| Technology | Thick Film | - | Thin Film | Thin Film — Different resistor technology, may affect performance in specific applications. |
Verified drop-in options for FRC0805F5232TS are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.