
Vishay
A higher-power alternative with a slightly different resistance value (1kΩ vs 910Ω) that may be suitable for many applications.
FRC0805F9100TS is a general-purpose 910Ω 1% 0.125W resistor in a standard 0805 package. When seeking alternatives, focus on matching resistance, tolerance, and TCR, while considering power rating upgrades.
Resistance differs by ~10%; TCR may vary on some parts. Must be verified.
All viable candidates are in the same 0805 package.
1kΩ 0805 resistors are widely available from multiple vendors.
No exact drop-in replacement was found. The closest options have a slightly different resistance of 1kΩ and must be reviewed.
Upgrade to a higher power part like the Vishay CRCW08051K00FKEAHP, accepting the minor resistance change from 910Ω to 1kΩ.
The primary risk is the resistance deviation from 910Ω to the more common 1kΩ value, which may impact circuit performance.

Vishay
A higher-power alternative with a slightly different resistance value (1kΩ vs 910Ω) that may be suitable for many applications.
| Feature / factor | FRC0805F9100TS | CRCW08051K00FKEAHP | SR0805FR-471KL | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Power | 0.125W | 0.5W | 0.5W | 0.5W — Significant upgrade in power handling.; SR0805FR-471KL: Significant upgrade in power handling. | |
| Resistance | 910Ω | 1kΩ | 1kΩ | 1kΩ — Within 10% of target, but requires verification.; SR0805FR-471KL: Within 10% of target, but requires verification. | |
| Tcr | ±100 ppm/°C | ±100 ppm/°C | ±200 ppm/°C | ±100 ppm/°C / ±200 ppm/°C — Matches target's precision.; SR0805FR-471KL: Worse temperature stability. | |
| Tolerance | ±1% | ±1% | - | ±1% — Matches target's tolerance. | |
| Package | 0805 | 0805 | - | 0805 — Same package for drop-in fit. | |
| Application | General Purpose | - | AEC-Q200 | AEC-Q200 — Automotive grade is an upgrade. |
CRCW08051K00FKEAHP by Vishay is a strong alternative, offering a much higher power rating (0.5W) with the same tolerance and TCR. However, its resistance is 1kΩ, which is about 10% higher and should be verified for your circuit.