Is there a pin-compatible replacement for FRC1206J120 TS?

Several alternatives share the same 1206 package and pinout. However, no direct drop-in with 12Ω ±5% was found. All viable candidates have slightly different nominal resistance values (e.g., 11Ω, 13Ω) and require engineering verification.

What risks should I check before replacing FRC1206J120 TS?

The main risk is the change in nominal resistance. Verify if your circuit can tolerate a value of 10.5Ω, 11Ω, or 13Ω instead of 12Ω. While candidates have better tolerance (±1%), their nominal value is outside the original part's tolerance band.

FRC1206J120 TS Alternatives, Datasheet & Cross Reference | FOJAN

Find suitable replacements for the FOJAN FRC1206J120 TS, a 12Ω 5% 0.25W 1206 chip resistor. Alternatives with similar packages and tighter tolerances are available but require review of nominal resistance.

AI replacement insight

Electrical riskmedium

Nominal resistance shift requires circuit analysis.

Package risklow

All viable candidates use the same 1206 package.

Can it be replaced directly?

No direct, drop-in replacement with identical resistance and tolerance was found. All candidates require a review of the nominal resistance value.

Best replacement path

Parametric relaxation to a nearby standard value (e.g., 11Ω or 13Ω) with a tighter tolerance (±1%).

Main risk

The primary risk is the shift in nominal resistance, which could affect circuit performance (e.g., timing, gain, voltage division).

Recommended alternatives

An 11Ω, ±1% tolerance resistor in the same 1206 package. Power and TCR ratings match.

View details

Alternative comparison matrix

Feature / factor	FRC1206J120 TS	1206W4F110JT5E	1206W4F130JT5E	SCR1206F10R5	Compatibility / risk
Package	1206	1206	1206	1206	1206 — Same form factor.; 1206W4F130JT5E: Same form factor.; SCR1206F10R5: Same form factor.
Resistance	12 Ω	11 Ω	13 Ω	10.5 Ω	11 Ω / 13 Ω / 10.5 Ω — 8.3% lower; outside target's ±5% tolerance band.; 1206W4F130JT5E: 8.3% higher; outside target's ±5% tolerance band.; SCR1206F10R5: 12.5% lower; outside target's ±5% tolerance band.
Tolerance	±5%	±1%	±1%	±1%	±1% — Tighter tolerance provides better precision.; 1206W4F130JT5E: Tighter tolerance provides better precision.; SCR1206F10R5: Tighter tolerance provides better precision.
Power	0.25W	0.25W	0.25W	0.25W	0.25W — Equal power rating.; 1206W4F130JT5E: Equal power rating.; SCR1206F10R5: Equal power rating.
Tcr	±100 ppm/°C	±100 ppm/°C	±100 ppm/°C	-	±100 ppm/°C — Same temperature stability.; 1206W4F130JT5E: Same temperature stability.

Application & sourcing insights

Questions & answers

Candidates like UNI-ROYAL's 1206W4F110JT5E (11Ω) or 1206W4F130JT5E (13Ω) offer a tighter ±1% tolerance in the same package, but the nominal resistance differs. The best choice depends on your circuit's sensitivity to this resistance shift.