
UNI-ROYAL
A strong alternative in the same 2010 package with matching resistance, tolerance, and power rating.
Find suitable replacements for the FRC2010F1200TS, a 120Ω 1% 0.75W 2010 thick film chip resistor. This guide covers pin-compatible options and functional alternatives.
Low if key parameters (Resistance, Power, Tolerance, TCR) are matched.
Some alternatives have different package sizes requiring layout changes.
This is a common commodity part available from multiple vendors.
Direct replacement for FRC2010F1200TS should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
The most direct path is a resistor with the same 2010 package, 120Ω resistance, ±1% tolerance, and at least 0.75W power rating.
The main risk is using a part with a wider tolerance (e.g., ±5%) or a different package size that does not fit the existing PCB layout.

UNI-ROYAL
A strong alternative in the same 2010 package with matching resistance, tolerance, and power rating.
| Feature / factor | FRC2010F1200TS | 201007F1200T4E | RC2010JK-07120RL | FRC2512F1200TS | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 2010 | 2010 | 2010 | 2512 | 2010 / 2512 — Matches target package size.; RC2010JK-07120RL: Matches target package size.; FRC2512F1200TS: Larger package, requires PCB layout change. |
| Resistance | 120.0 Ω | 120.0 Ω | 120.0 Ω | 120.0 Ω | 120.0 Ω — matched; RC2010JK-07120RL: matched; FRC2512F1200TS: matched |
| Tolerance | ±1.0% | ±1.0% | ±5.0% | ±1.0% | ±1.0% / ±5.0% — matched; RC2010JK-07120RL: Wider tolerance may impact circuit precision.; FRC2512F1200TS: matched |
| Power | 0.75 W | 0.75 W | 0.75 W | 1.0 W | 0.75 W / 1.0 W — matched; RC2010JK-07120RL: matched; FRC2512F1200TS: Higher power rating provides more margin. |
| Tcr | ±100 ppm/°C | Unknown | - | - | Unknown — Datasheet review needed. |
Verified drop-in options for FRC2010F1200TS are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.