Is there a pin-compatible replacement for FRC2010F2001TS?

201007J0202T4E is package-compatible (2010), but its electrical tolerance is wider (±5% vs ±1%). A full pin-to-pin equivalent with identical specs was not identified and requires careful review.

What risks should I check before replacing FRC2010F2001TS?

Verify the circuit's sensitivity to resistance tolerance (target is ±1%). Check the candidate's Temperature Coefficient of Resistance (TCR). Ensure the physical package matches the PCB layout (2010).

FRC2010F2001TS Alternatives, Datasheet & Cross Reference | FOJAN

Finding a substitute for the FRC2010F2001TS, a 2kΩ 1% 0.75W resistor in a 2010 package, requires careful matching of electrical parameters and physical size. Alternatives exist but may involve trade-offs.

AI replacement insight

Electrical riskhigh

Potential tolerance and TCR mismatches require circuit validation.

Package riskhigh

Some alternatives are in different packages, requiring board redesign.

Sourcing riskmedium

Availability of precise 2010 package resistors can vary.

Can it be replaced directly?

No direct, drop-in replacement with identical key parameters was found. The closest options require compromises, such as accepting a wider tolerance or changing the PCB layout.

Best replacement path

For a direct fit, prioritize candidates in a 2010 package with matching resistance and power. 201007J0202T4E is a potential fit but has a wider tolerance (±5%) that needs verification.

Main risk

The primary risks are mismatched resistance tolerance, which can affect circuit precision, and different package sizes, which require board redesign.

Recommended alternatives

A 2kΩ, 0.75W resistor in a 2010 package, but with a wider ±5% tolerance compared to the target's ±1%.

View details

Alternative comparison matrix

Feature / factor	FRC2010F2001TS	201007J0202T4E	25121WF2001T4E	Compatibility / risk
Package	2010 (5025 metric)	2010	2512	2010 / 2512 — Package size matches.; 25121WF2001T4E: Larger package requires PCB redesign.
Resistance	2kΩ	2kΩ	2kΩ	2kΩ — Resistance value matches.; 25121WF2001T4E: Resistance value matches.
Tolerance	±1%	±5%	±1%	±5% / ±1% — Wider tolerance requires circuit validation.; 25121WF2001T4E: Resistance tolerance matches.
Power	0.75W	0.75W	1.0W	0.75W / 1.0W — Power rating matches.; 25121WF2001T4E: Higher power rating is a safe upgrade.
Tcr	±100 ppm/°C	Not specified	Not specified	Not specified — TCR must be verified from datasheet.; 25121WF2001T4E: TCR must be verified from datasheet.

Application & sourcing insights

Questions & answers

The best alternative depends on design flexibility. 201007J0202T4E matches the package and power but has a wider ±5% tolerance. 25121WF2001T4E matches tolerance but is in a larger 2512 package.