Is there a pin-compatible replacement for FRC2010F2200TS?

While some candidates are package-compatible, they have different electrical parameters and are not drop-in replacements. They require engineering review.

What risks should I check before replacing FRC2010F2200TS?

Verify that the alternative's tolerance and resistance are acceptable. Most importantly, confirm the actual power dissipation is safely below the candidate's rating.

FRC2010F2200TS Alternatives, Datasheet & Cross Reference | FOJAN

Reviewing substitutes for the FOJAN FRC2010F2200TS, a 220Ω 1% 0.75W 2010 chip resistor. Key considerations for replacement include matching the package, tolerance, and power rating.

AI replacement insight

Electrical riskmedium

Candidates have parametric differences and fail power safety rules, requiring circuit analysis.

Package risklow

The best candidates match the 2010 package.

Sourcing riskmedium

Finding a part that meets the strict power rule may be difficult.

Can it be replaced directly?

No, there are no verified direct replacements for the FRC2010F2200TS among the candidates reviewed due to parametric differences and safety rule failures.

Best replacement path

Consider FRC2010J221 TS if ±5% tolerance is acceptable, or RC2010FK-07200RL if 200Ω resistance is acceptable. Both require review as they don't meet the power safety factor.

Main risk

The main risks are functional impact from incorrect tolerance/resistance and potential thermal failure from not meeting the power safety margin.

Recommended alternatives

A parametric alternative in the same 2010 package with 220Ω resistance, but with a relaxed ±5% tolerance. Requires engineering review.

View details

Alternative comparison matrix

Feature / factor	FRC2010F2200TS	FRC2010J221 TS	RC2010FK-07200RL	Compatibility / risk
Package	2010 (5025 Metric)	2010	2010 (5025 Metric)	2010 / 2010 (5025 Metric) — Package size matches target.; RC2010FK-07200RL: Package size matches target.
Resistance	220.0 Ω	220.0 Ω	200.0 Ω	220.0 Ω / 200.0 Ω — Resistance value matches target.; RC2010FK-07200RL: Resistance is ~9% lower than target.
Tolerance	±1.0%	±5.0%	±1.0%	±5.0% / ±1.0% — Tolerance is wider than target's precision spec.; RC2010FK-07200RL: Tolerance matches target.
Power	0.75 W	0.75 W	0.75 W	0.75 W — Does not meet 1.5x safety factor rule (req. >1.125W).; RC2010FK-07200RL: Does not meet 1.5x safety factor rule (req. >1.125W).
Tcr	±100 ppm/°C	±100 ppm/°C	±100 ppm/°C	±100 ppm/°C — Temperature coefficient matches target.; RC2010FK-07200RL: Temperature coefficient matches target.

Application & sourcing insights

Questions & answers

FRC2010J221 TS is a potential alternative if ±5% tolerance is acceptable. Both it and other options require engineering validation for power dissipation.