
EVVO
A strong parametric alternative in a 2512 package with 4.7Ω resistance.
Find and compare alternatives for the FOJAN FRC2512F4R30TS, a 4.3Ω 1W 1% 2512 thick film resistor. Key considerations for replacement include resistance value and temperature coefficient (TCR).
Resistance value differs by ~9%, which may be outside the tolerance for some circuits.
All viable candidates use the same 2512 package, ensuring form and fit compatibility.
No exact drop-in replacement was found. Several parts match the package, power, and tolerance, but have slightly different resistance values (e.g., 4.7Ω or 3.9Ω).
Parametric alternatives with slightly different resistance values (e.g., 3.9Ω or 4.7Ω) are available and require circuit-level validation.
The primary risk is the change in resistance value, which may affect circuit performance. A secondary risk is a potential mismatch in the Temperature Coefficient of Resistance (TCR).

EVVO
A strong parametric alternative in a 2512 package with 4.7Ω resistance.
| Feature / factor | FRC2512F4R30TS | SCR2512F4R7 | 25121WF390KT4E | 25121WF470KT4E | Compatibility / risk |
|---|---|---|---|---|---|
| Resistance | 4.3 Ω | 4.7 Ω | 3.9 Ω | 4.7 Ω | 4.7 Ω / 3.9 Ω — +9.3% deviation; 25121WF390KT4E: -9.3% deviation; 25121WF470KT4E: +9.3% deviation; CRH2512F4R70E04S: +9.3% deviation |
| Power | 1.0 W | 1.0 W | 1.0 W | 1.0 W | 1.0 W / 2.0 W — matched; 25121WF390KT4E: matched; 25121WF470KT4E: matched; CRH2512F4R70E04S: Upgrade |
| Tolerance | ±1% | ±1% | ±1% | ±1% | ±1% — matched; 25121WF390KT4E: matched; 25121WF470KT4E: matched |
| Package | 2512 | 2512 | 2512 | 2512 | 2512 — matched; 25121WF390KT4E: matched; 25121WF470KT4E: matched; CRH2512F4R70E04S: matched |
| Tcr | ±100 ppm/°C | ±100 ppm/°C (est.) | - | Unknown | ±100 ppm/°C (est.) / Unknown / ±400 ppm/°C (est.) — Assumed from series datasheet; 25121WF470KT4E: Datasheet review needed; CRH2512F4R70E04S: Significantly worse |
Candidates like UNI-ROYAL's 25121WF470KT4E (4.7Ω) or 25121WF390KT4E (3.9Ω) are strong parametric alternatives, matching package, power, and tolerance. The resistance difference must be acceptable for your application.