
UNI-ROYAL
Matches package, resistance, and tolerance, but requires review of the unspecified Temperature Coefficient of Resistance (TCR).
Reviewing alternatives for the FOJAN FRL0603FR220TS, a 0603 size, 220mΩ, 1% thick film chip resistor. Key considerations for substitutes include matching the low resistance value, power rating, and temperature coefficient (TCR).
Unknown TCR on candidates poses a risk for temperature-sensitive designs. One candidate has a 9% lower resistance.
All viable candidates share the same 0603 package, ensuring physical compatibility.
Direct replacement for FRL0603FR220TS should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
The most direct path is 0603WAF220LT5E, which matches key electricals but needs TCR verification. A parametric alternative, FRL0603FR200TS, offers a slightly different resistance value.
The primary risk is an unknown or mismatched Temperature Coefficient of Resistance (TCR), which could cause performance drift in temperature-sensitive circuits.

UNI-ROYAL
Matches package, resistance, and tolerance, but requires review of the unspecified Temperature Coefficient of Resistance (TCR).
| Feature / factor | FRL0603FR220TS | 0603WAF220LT5E | FRL0603FR200TS | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 0603 | 0603 | 0603 | 0603 — Same EIA package size.; FRL0603FR200TS: Same EIA package size. | |
| Resistance | 0.22 Ω | 0.22 Ω | 0.20 Ω | 0.22 Ω / 0.20 Ω — Resistance value matches.; FRL0603FR200TS: Resistance is ~9% lower. | |
| Tolerance | ±1% | ±1% | ±1% | ±1% — Tolerance matches.; FRL0603FR200TS: Tolerance matches. | |
| Power | 0.1 W | 0.1 W | 0.1 W | 0.1 W — Power rating matches.; FRL0603FR200TS: Power rating matches. | |
| Tcr | ±800 ppm/°C | Not Specified | Not Specified | Not Specified — Candidate TCR is missing, requires datasheet review.; FRL0603FR200TS: From same series, but TCR not confirmed. |
Verified drop-in options for FRL0603FR220TS are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.