
cjiang (Changjiang Microelectronics Tech)
A significant electrical upgrade from the same manufacturer, but requires verification of mechanical fit due to larger dimensions.
Finding a substitute for the FXL0518-2R2-M 2.2µH inductor involves balancing electrical upgrades with mechanical fit. While alternatives offer superior current ratings, careful attention must be paid to package dimensions, especially height.
Most alternatives are significantly taller, requiring clearance verification.
Kept candidates are electrical upgrades (higher current, lower DCR).
Target and candidates are active from common manufacturers.
No direct pin-to-pin replacement has been identified. All viable alternatives require mechanical verification due to differences in package height or footprint.
Consider FEXL0530A-2R2M for a significant electrical upgrade, but you must verify the larger package (5.5x5.3x3.0mm) fits your layout.
Mechanical interference. Most alternatives are taller than the original 1.8mm part, posing a risk in height-constrained designs.

cjiang (Changjiang Microelectronics Tech)
A significant electrical upgrade from the same manufacturer, but requires verification of mechanical fit due to larger dimensions.
| Feature / factor | FXL0518-2R2-M | FEXL0530A-2R2M | APH0530T2R2M | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 5.4x5.2x1.8mm | 5.5x5.3x3.0mm | 5.4x5.2x2.8mm | 5.5x5.3x3.0mm / 5.4x5.2x2.8mm — Footprint is slightly larger and height is 1.2mm greater.; APH0530T2R2M: Footprint matches, but height is 1mm greater. | |
| Saturation Current A | 6.5A | 10.0A | 7.0A | 10.0A / 7.0A — Significantly higher saturation current.; APH0530T2R2M: Higher saturation current. | |
| Current A | 4.2A | 7.2A | 7.0A | 7.2A / 7.0A — Significantly higher RMS current.; APH0530T2R2M: Higher RMS current. | |
| Dcr Ohm | 35mΩ | 14.5mΩ | 29mΩ | 14.5mΩ / 29mΩ — Significantly lower DCR improves efficiency.; APH0530T2R2M: Lower DCR improves efficiency. |
FEXL0530A-2R2M offers a major electrical upgrade with higher current handling and lower DCR. However, it is physically larger, so you must confirm it fits your PCB layout and has enough vertical clearance.