
APV
A potential pin-compatible upgrade with higher current ratings and lower DCR, but requires height verification.
The FXL0624-100-M is a compact 10µH power inductor in a 7.0x6.6mm package. Several alternatives exist, offering higher performance, but may require verification of package dimensions before substitution.
Many alternatives have different footprints or are taller than the original part.
Most candidates offer superior current ratings and lower DCR, posing minimal electrical risk.
Direct replacement for FXL0624-100-M should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Upgrade to APH0630T100M for better electrical performance, after verifying the 0.4mm extra height is acceptable.
The main risk is mechanical incompatibility, primarily due to differences in component height or footprint size.

APV
A potential pin-compatible upgrade with higher current ratings and lower DCR, but requires height verification.
| Feature / factor | FXL0624-100-M | APH0630T100M | FXL0650-100-M | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 7.0x6.6x2.4mm | 7.0x6.6x2.8mm | 6.6x7.0x4.8mm | 7.0x6.6x2.8mm / 6.6x7.0x4.8mm — Footprint matches, but candidate is 0.4mm taller.; FXL0650-100-M: Footprint matches, but candidate is significantly taller. | |
| Current | 2.4 A | 3.91 A | 3.8 A | 3.91 A / 3.8 A — Higher heat rating current (Irms).; FXL0650-100-M: Higher heat rating current (Irms). | |
| Saturation Current A | 3.2 A | 4.57 A | 5.3 A | 4.57 A / 5.3 A — Higher saturation current (Isat).; FXL0650-100-M: Higher saturation current (Isat). | |
| Dcr Ohm | 101 mΩ | 68 mΩ | 60 mΩ | 68 mΩ / 60 mΩ — Lower DCR improves efficiency.; FXL0650-100-M: Lower DCR improves efficiency. |
Verified drop-in options for FXL0624-100-M are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.