Pricing

Best Alternatives to FXL0624-4R7-M

Package: 7.0mm x 6.6mmShenzhen CJiang Technology Co., Ltd.ChokesInductance: 4.7 µHTolerance: ±20%Saturation Current (Isat): 7.5 AHeating Rating Current (Irms): 5 ADC Resistance (DCR): 50 mΩ

FXL0624-4R7-M is a 4.7µH power inductor from cjiang in a 7.0x6.6mm package. Key alternatives offer higher current ratings and lower resistance, but may have a slightly different height that requires verification.

AI replacement insight

Package riskmedium

Alternatives are slightly taller (3.0mm vs 2.4mm), requiring clearance verification.

Electrical risklow

Key alternatives offer improved current ratings and lower DCR, which is generally beneficial.

Can it be replaced directly?

FXL0630-4R7-M is a near-direct replacement, sharing the same footprint and offering improved electrical specs. Verify the slightly increased height (3.0mm vs 2.4mm) is acceptable.

Best replacement path

Upgrade to FXL0630-4R7-M for better electrical performance from the same manufacturer.

Main risk

The primary risk is the slightly increased package height of most alternatives, which could cause mechanical interference on the PCB.

Recommended alternatives

2
FXL0630-4R7-M package
FXL0630-4R7-M

cjiang (Changjiang Microelectronics Tech)

Needs validationlow risk

A strong upgrade from the same manufacturer with higher current ratings and lower DCR in a similar package.

View details

Alternative comparison matrix

Feature / factorFXL0624-4R7-MFXL0630-4R7-MXR0630-4R7MAlt 3Compatibility / risk
Inductance4.7µH4.7µH-4.7µH — Inductance matches.
Dcr50mΩ33mΩ-33mΩ — Lower DCR improves efficiency.
CurrentIrms: 5A, Isat: 7.5AIrms: 6A, Isat: 9A-Irms: 6A, Isat: 9A — Higher current ratings provide more margin.
Package7.0x6.6x2.4mm7.0x6.6x3.0mm-7.0x6.6x3.0mm — Height is 0.6mm greater.

Application & sourcing insights

Questions & answers

FXL0630-4R7-M from the same manufacturer (cjiang) is an excellent upgrade, offering higher current ratings and lower DCR in the same 7.0x6.6mm footprint. A minor height difference (3.0mm vs 2.4mm) should be verified.