What risks should I check before replacing GH1.25-6PWBPZ?

The main risk is mechanical mismatch. Before replacing, you must verify the PCB footprint, connector height, and the plastic housing's locking/keying features from the datasheet to ensure it fits your board and mates with the corresponding cable connector.

GH1.25-6PWBPZ Alternatives, Datasheet & Cross Reference | BOOMELE

Find and compare potential replacements for the BOOMELE GH1.25-6PWBPZ, a 6-pin 1.25mm pitch right-angle SMT header. This guide analyzes alternatives based on key electrical and mechanical parameters.

AI replacement insight

Package riskhigh

Even with matching specs, connector footprints and locking features can vary between manufacturers and series.

Electrical risklow

Key electrical ratings like voltage and current are matched or exceeded by top candidates.

Can it be replaced directly?

Direct replacement for GH1.25-6PWBPZ should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.

Best replacement path

ZX-GH1.25-WT6 is the most promising candidate as it belongs to the same 'GH1.25' series, suggesting higher compatibility. However, datasheet verification is mandatory.

Main risk

The primary risk is mechanical incompatibility, including PCB footprint, connector height, and mating interface differences.

Recommended alternatives

Strong alternative with matching pitch, pin count, and orientation; features a higher voltage rating.

View details

Alternative comparison matrix

Feature / factor	GH1.25-6PWBPZ	ZX-GH1.25-WT6	A1254WR-S-6P	Compatibility / risk
Pin Count	6	6	6	6 — Number of positions match.; A1254WR-S-6P: Number of positions match.
Pitch	1.25mm	1.25mm	1.25mm	1.25mm — Pin pitch matches.; A1254WR-S-6P: Pin pitch matches.
Package	SMT, Right Angle	SMT, Right Angle	SMT, Right Angle	SMT, Right Angle — Mounting type and orientation match.; A1254WR-S-6P: Mounting type and orientation match.
Voltage	50V	125V	125V	125V — Higher voltage rating is acceptable.; A1254WR-S-6P: Higher voltage rating is acceptable.
Current	1.0A	1.0A	1.0A	1.0A — Current rating matches.; A1254WR-S-6P: Current rating matches.

Application & sourcing insights

Questions & answers

Verified drop-in options for GH1.25-6PWBPZ are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.