Is there a pin-compatible replacement for GHR-08V-S?

No, a pin-compatible replacement has not been identified. Connectors with the same pin count and pitch, like those from the Molex PicoBlade series, are not mechanically compatible with the JST GH series' unique locking mechanism and housing shape.

What risks should I check before replacing GHR-08V-S?

The main risk is mechanical incompatibility. You must verify that any proposed replacement is from the same JST GH connector family. Using a part from a different series (e.g., Molex PicoBlade) will not mate with the intended header, requiring a board redesign.

GHR-08V-S Alternatives, Datasheet & Cross Reference | JST

The JST GHR-08V-S is an 8-position, 1.25mm pitch housing from the GH connector series. Finding a substitute requires careful attention, as no direct drop-in replacements exist; alternatives require changing the entire connector system.

AI replacement insight

Package riskhigh

Connector series are not inter-mateable. A substitute will not fit the existing mating header.

Electrical risklow

Most 1.25mm systems have similar voltage/current ratings, but must be verified.

Sourcing risklow

JST GH is a popular series, but alternatives like Molex PicoBlade are also widely available from multiple sources.

Can it be replaced directly?

No, there are no direct, drop-in replacements for the JST GHR-08V-S. While other 8-pin, 1.25mm pitch housings exist, they belong to different connector families (like Molex PicoBlade) and are not mechanically compatible.

Best replacement path

There are no direct drop-in replacements for GHR-08V-S. The best path is to find an alternative 1.25mm pitch connector system, like Molex PicoBlade (e.g., 510210800), and redesign the board to use the corresponding mating header.

Main risk

The primary risk is mechanical incompatibility. Using a housing from a different connector series will result in a part that does not mate with the existing JST GH header on the PCB.

Recommended alternatives

A functional alternative from a different major manufacturer, but it is part of an incompatible connector family requiring a full system redesign.

View details

Alternative comparison matrix

Feature / factor	GHR-08V-S	510210800	A1251H-8P	Compatibility / risk
Package	Housing	Receptacle Housing	Housing	Receptacle Housing — Both are housings for 1.25mm pitch systems.; A1251H-8P: Both are housings for 1.25mm pitch systems.
Pinout	8	8	8	8 — Pin count matches.; A1251H-8P: Pin count matches.
Interface	JST GH	Molex PicoBlade	A1251H (PicoBlade Style)	Molex PicoBlade / A1251H (PicoBlade Style) — Connector series are different and not inter-mateable.; A1251H-8P: Connector series are different and not inter-mateable.
Material	PBT	PBT	Nylon 66	PBT / Nylon 66 — Housing material matches.; A1251H-8P: Material differs, check application requirements.
Temperature	-25°C to +85°C (from mating header)	-	-40°C to +105°C	-40°C to +105°C — Candidate has a wider operating temperature range.

Application & sourcing insights

Questions & answers

There are no direct drop-in alternatives for GHR-08V-S. Functional alternatives like Molex 510210800 exist, but they belong to a different connector system (PicoBlade) and require changing the mating PCB header as well.