
Murata Electronics
Electrically identical functional alternative in a smaller 0201 package.
GJM1555C1HR20BB01D is a precision 0.2pF 50V high-Q capacitor in an 0402 package. While no direct drop-in replacement exists, alternatives are available that require either a PCB layout change or careful validation of a different capacitance value.
Capacitance is critical for high-Q parts; deviation can cause circuit failure.
An electrically identical part exists in a smaller package, requiring a board redesign.
Multiple parametric or functional alternatives are available from major manufacturers.
No, there are no direct, one-to-one replacements for GJM1555C1HR20BB01D with the same package and identical 0.2pF capacitance.
The best path is using GRM0335C1HR20BA01D, which is electrically identical but requires a PCB layout change for its smaller 0201 package.
The primary risk is capacitance mismatch, which can detune RF circuits. A secondary risk is package mismatch, requiring PCB redesign.

Murata Electronics
Electrically identical functional alternative in a smaller 0201 package.
| Feature / factor | GJM1555C1HR20BB01D | GRM0335C1HR20BA01D | CQ0402BRNPO9BNR30 | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Capacitance | 0.2 pF | 0.2 pF | 0.3 pF | 0.2 pF / 0.3 pF — Identical capacitance value.; CQ0402BRNPO9BNR30: 50% higher capacitance, may detune circuit. | |
| Package | 0402 (1005 metric) | 0201 (0603 metric) | 0402 (1005 metric) | 0201 (0603 metric) / 0402 (1005 metric) — Candidate is smaller, requires PCB redesign.; CQ0402BRNPO9BNR30: Package size and footprint match. | |
| Voltage | 50.0 V | 50.0 V | 50.0 V | 50.0 V — Voltage rating matches.; CQ0402BRNPO9BNR30: Voltage rating matches. | |
| Dielectric | C0G | C0G (NP0) | - | C0G (NP0) — Dielectric material matches. | |
| Lifecycle | Active | Active | - | Active — Both parts are in active production. | |
| Manufacturer | Murata Electronics | - | Yageo | Yageo — Cross-vendor alternative. |
The best alternative depends on your design constraints. GRM0335C1HR20BA01D is electrically identical but requires changing your PCB layout to a smaller 0201 package. If you must use the 0402 package, no exact match was found, and any substitute requires careful circuit validation.