GL5528
Senba Sensing Tech
Needs validationlow risk
A pin-compatible GL5528 photoresistor from a different manufacturer with matching key electrical and physical specifications.
Best Alternatives to GL5528(10-20)
The GL5528 is a common 5mm light-dependent resistor (LDR) used for light detection. Finding a substitute involves matching its light/dark resistance, package, and spectral response. Several manufacturers produce parts under the same GL5528 model number.
AI replacement insight
Electrical risklow
Key parameters are very close.
Package risklow
Standard 5mm radial package is identical.
Sourcing risklow
GL5528 is a widely multi-sourced component.
Can it be replaced directly?
Direct replacement for GL5528(10-20) should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Best replacement path
Cross-reference to other manufacturers' GL5528 series parts.
Main risk
The primary risk is a mismatch in the light resistance tolerance or the gamma value, which can alter the circuit's sensitivity to light.
Recommended alternatives
1Alternative comparison matrix
| Feature / factor | GL5528(10-20) | GL5528 | Alt 2 | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Application | Photoresistor (LDR) | Photoresistor (CdS Cell) | Photoresistor (CdS Cell) — Functionally identical. | ||
| Package | Radial, 5mm | Radial, 5mm | Radial, 5mm — Physically compatible. | ||
| Resistance | 8-20 kΩ | 10kΩ - 20kΩ | 10kΩ - 20kΩ — Resistance range at 10 Lux is compatible. | ||
| Voltage | 150 V | 150V | 150V — Maximum voltage rating matches. | ||
| Power | 90 mW | 100mW | 100mW — Higher power rating is a safe upgrade. | ||
| Temperature | -30°C to 70°C | -30°C to +70°C | -30°C to +70°C — Operating temperature range matches. | ||
| Gamma | 0.65 | 0.6 | 0.6 — Slight difference may affect light-resistance curve. |
Application & sourcing insights
Questions & answers
Verified drop-in options for GL5528(10-20) are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.