Is there a pin-compatible replacement for GRM0335C1H1R5CA01D?

Yes, parts like GRM0335C1H1R8WA01D are in the same 0201 package and are pin-compatible. However, electrical parameters differ, so you must verify performance.

What risks should I check before replacing GRM0335C1H1R5CA01D?

The main risk is the change in capacitance from 1.5pF. For RF, timing, or filter circuits, this deviation can cause performance issues or failure. Always test the substitute in your design.

GRM0335C1H1R5CA01D Alternatives, Datasheet & Cross Reference | Murata Manufacturing Co., Ltd.

Finding a substitute for the Murata GRM0335C1H1R5CA01D 1.5pF capacitor requires careful matching. Alternatives exist but often have different capacitance values that need engineering review.

AI replacement insight

Electrical riskmedium

Capacitance mismatch is the main concern for C0G capacitors.

Package risklow

Candidates share the same 0201 package, ensuring physical fit.

Can it be replaced directly?

No direct drop-in replacement with identical 1.5pF capacitance was found. The closest options have 1.8pF capacitance and require circuit validation.

Best replacement path

Use a Murata GRM part like GRM0335C1H1R8WA01D, but only if the circuit tolerates a +20% capacitance increase.

Main risk

The primary risk is circuit detuning or malfunction due to capacitance mismatch, affecting RF, timing, or filter performance.

Recommended alternatives

A form-fit alternate with slightly higher capacitance (1.8pF) but much tighter tolerance (±0.05pF).

View details

Alternative comparison matrix

Feature / factor	GRM0335C1H1R5CA01D	GRM0335C1H1R8WA01D	GRM0335C1H1R8BA01D	Compatibility / risk
Package	0201 (0603 metric)	0201 (0603 metric)	0201 (0603 Metric)	0201 (0603 metric) / 0201 (0603 Metric) — Identical package ensures form-factor compatibility.; GRM0335C1H1R8BA01D: Identical package ensures form-factor compatibility.
Capacitance	1.5 pF	1.8 pF	1.8 pF	1.8 pF — Capacitance is 20% higher, requires circuit validation.; GRM0335C1H1R8BA01D: Capacitance is 20% higher, requires circuit validation.
Tolerance	±0.25 pF	±0.05 pF	±0.1 pF	±0.05 pF / ±0.1 pF — Tighter tolerance is a performance upgrade.; GRM0335C1H1R8BA01D: Tighter tolerance is a performance upgrade.
Voltage	50.0 V	50.0 V	50.0 V	50.0 V — Voltage rating is identical.; GRM0335C1H1R8BA01D: Voltage rating is identical.
Dielectric	C0G (NP0)	C0G (EIA)	-	C0G (EIA) — Same stable C0G dielectric.

Application & sourcing insights

Questions & answers

The best alternative found is GRM0335C1H1R8WA01D. It has a tighter tolerance but slightly higher capacitance (1.8pF vs 1.5pF), which must be validated for your application.