Is there a pin-compatible replacement for GS8052-SR?

While several op-amps share the SOP-8 package, pinout compatibility must be verified against datasheets. No direct pin-compatible replacement with matching performance has been confirmed.

What risks should I check before replacing GS8052-SR?

The main risk is bandwidth mismatch; ensure the circuit's frequency response is not compromised. Also, verify the pinout, supply voltage range, and output drive capability.

GS8052-SR Alternatives, Datasheet & Cross Reference | Gainsil

GS8052-SR is a high-speed, dual-channel CMOS op-amp from Gainsil in an SOP-8 package. Finding a direct replacement requires matching its 250 MHz bandwidth and rail-to-rail output.

AI replacement insight

Electrical riskhigh

Massive bandwidth mismatch will cause circuit failure in high-speed applications.

Package risklow

SOP-8 is a standard package, but pinout must always be verified.

Can it be replaced directly?

No direct, verified pin-to-pin replacement has been identified. Alternatives require careful review due to major performance differences, especially in bandwidth.

Best replacement path

Search for dual, high-speed (>200MHz), rail-to-rail op-amps in an SOP-8 package. Candidates like TP2412-SR are functionally similar but have much lower bandwidth.

Main risk

The primary risk is a severe reduction in circuit speed, as common alternatives have much lower bandwidth (e.g., 10 MHz vs. the target's 250 MHz).

Recommended alternatives

A dual op-amp with a wider voltage range but much lower bandwidth. Requires review for non-speed-critical circuits.

View details

Alternative comparison matrix

Feature / factor	GS8052-SR	TP2412-SR	AD8606ARZ(UMW)	Compatibility / risk
Package	SOP-8	SOP-8	SOP-8	SOP-8 — Same package and pin count.; AD8606ARZ(UMW): Same package and pin count.
Pinout	Standard	Unknown	Unknown	Unknown — Standard dual op-amp pinout is likely but must be verified from datasheet.; AD8606ARZ(UMW): Standard dual op-amp pinout is likely but must be verified from datasheet.
Bandwidth	250 MHz	10 MHz	10 MHz	10 MHz — Significant performance downgrade.; AD8606ARZ(UMW): Significant performance downgrade.
Voltage	2.5V to 5.5V	2.2V to 5.5V	2.7V to 5.5V	2.2V to 5.5V / 2.7V to 5.5V — Wider supply range; minimum voltage is lower.; AD8606ARZ(UMW): Slightly narrower supply range; minimum voltage is higher.
Application	Rail-to-Rail Output	Rail-to-Rail I/O	Rail-to-Rail I/O	Rail-to-Rail I/O — Both are rail-to-rail CMOS op-amps.; AD8606ARZ(UMW): Both are rail-to-rail CMOS op-amps.

Application & sourcing insights

Questions & answers

For applications not needing high speed, TP2412-SR is an option in the same package but with only 10MHz bandwidth. For high-speed circuits, a replacement with ~250MHz bandwidth is necessary.