
BOOMELE
A parametric upgrade (3A/250V) in a straight through-hole package; mechanical fit must be verified.
Finding a substitute for the HC-1.25-2Y, a 2-pin 1.25mm pitch header, requires careful mechanical verification. While several options match its electrical ratings, their mounting styles vary.
Target mounting type is unknown. Candidates have specific SMT or TH footprints that must be verified against the PCB layout.
Several candidates match or exceed the target's voltage and current ratings.
No direct drop-in replacement can be confirmed for HC-1.25-2Y without verifying its exact mounting type (SMT/TH) and orientation (straight/right-angle). Several candidates match electrically but differ mechanically.
Verify the mounting type of the original HC-1.25-2Y. If it is a straight through-hole, 1.25T-2A米色 is a potential upgrade. If it is a right-angle SMT, ZX-GH1.25-WT2 is a strong parametric match.
The primary risk is mechanical incompatibility. Using a substitute with the wrong mounting type or footprint will prevent it from being installed on the PCB.

BOOMELE
A parametric upgrade (3A/250V) in a straight through-hole package; mechanical fit must be verified.
| Feature / factor | HC-1.25-2Y | 1.25T-2A米色 | ZX-GH1.25-WT2 | XD-1.25-2PWT | Compatibility / risk |
|---|---|---|---|---|---|
| Package | 1.25mm Pitch Header | 1.25mm Pitch Header | 1.25mm Pitch Header | 1.25mm Pitch Header | 1.25mm Pitch Header — Candidate is Through-Hole, Straight. Target mounting is unknown.; ZX-GH1.25-WT2: Candidate is SMT, Right Angle. Target mounting is unknown.; XD-1.25-2PWT: Candidate is SMT, Right Angle. Target mounting is unknown. |
| Pinout | 2 | 2 | 2 | 2 | 2 — Pitch and pin count match.; ZX-GH1.25-WT2: Pitch and pin count match.; XD-1.25-2PWT: Pitch and pin count match. |
| Voltage | 125V | 250V | 125V | 125V | 250V / 125V — Higher voltage rating provides more margin.; ZX-GH1.25-WT2: matched; XD-1.25-2PWT: matched |
| Current | 1A | 3.0A | 1.0A | 1A | 3.0A / 1.0A / 1A — Higher current rating provides more margin.; ZX-GH1.25-WT2: matched; XD-1.25-2PWT: matched |
| Temperature | -25°C to +85°C | Missing | -25°C to +85°C | Missing | Missing / -25°C to +85°C — Operating temperature not specified.; ZX-GH1.25-WT2: matched; XD-1.25-2PWT: Operating temperature not specified. |
The best alternative depends on your PCB's requirements. For a straight through-hole design, '1.25T-2A米色' is a parametric upgrade. For a right-angle SMT design, 'ZX-GH1.25-WT2' is a strong match. You must verify the mechanical drawings.