
HCTL
Form-factor compatible header from the same manufacturer, but with a lower current rating of 2A.
HC-HY-2AW is a 2-pin, 2.0mm pitch right-angle header from HCTL rated for 3A. Alternatives exist but may require careful review of current ratings and mechanical footprint.
All identified alternatives have a lower current rating (2A vs 3A), posing a risk of overheating or failure under load.
Form factor matches, but PCB footprint must be verified from datasheets to ensure mechanical compatibility.
Direct replacement for HC-HY-2AW should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Consider form-factor compatible parts like PH-2AWD or HC-PH-2AWT, but verify the lower 2A current rating is acceptable for your design.
The primary risk is electrical overstress due to the lower current rating (2A) of available alternatives compared to the target's 3A.

HCTL
Form-factor compatible header from the same manufacturer, but with a lower current rating of 2A.
| Feature / factor | HC-HY-2AW | HC-PH-2AWT | PH-2AWD | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | Through Hole, Right Angle | Right Angle | Through Hole, Right Angle | Right Angle / Through Hole, Right Angle — Mounting type matches.; PH-2AWD: Mounting type matches. | |
| Pitch | 2.0mm | 2.0mm | 2.0mm | 2.0mm — Pitch matches.; PH-2AWD: Pitch matches. | |
| Current | 3A | 2A | 2A | 2A — Candidate has lower current rating.; PH-2AWD: Candidate has lower current rating. | |
| Voltage | 250V | 250V | 250V | 250V — Voltage rating matches.; PH-2AWD: Voltage rating matches. | |
| Pinout | Not verified | Not verified | Not verified | Not verified — Mechanical footprint requires datasheet comparison.; PH-2AWD: Mechanical footprint requires datasheet comparison. |
Verified drop-in options for HC-HY-2AW are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.