Is there a pin-compatible replacement for HC-XHB-6AW?

Possibly, but verification is required. HC-XH-6AW-G and S6B-XH-A(LF)(SN) match in pin count, pitch, and orientation. However, you must compare the datasheets to confirm the PCB footprint and dimensions are identical.

What risks should I check before replacing HC-XHB-6AW?

The main risk is mechanical mismatch. Before replacing, you must verify the PCB footprint, connector height, and that the 'B' in the target part number doesn't indicate a critical feature like a mounting post that is missing from the alternative.

HC-XHB-6AW Alternatives, Datasheet & Cross Reference | HCTL

HC-XHB-6AW is a 6-position, 2.5mm pitch right-angle header used for wire-to-board connections in a wide range of electronics. Finding a suitable replacement involves matching the mechanical footprint and electrical ratings.

AI replacement insight

Package riskmedium

The 'B' in the target MPN could signify a post or kinked legs affecting the footprint. Mating compatibility with non-XH series is a high risk.

Electrical risklow

Key electrical ratings (3A, 250V) are common for this connector type and matched by strong candidates.

Can it be replaced directly?

There are no confirmed direct drop-in replacements. However, HC-XH-6AW-G and S6B-XH-A(LF)(SN) are strong candidates that require mechanical verification via datasheet comparison before use.

Best replacement path

The strongest candidate is HC-XH-6AW-G from the same manufacturer, HCTL. S6B-XH-A(LF)(SN) from JST is also a strong cross-vendor option.

Main risk

The primary risk is mechanical incompatibility. This includes differences in the PCB footprint (pinout dimensions) and the mating interface of the connector housing.

Recommended alternatives

A near-identical part from the same manufacturer with matching core specifications.

View details

Alternative comparison matrix

Feature / factor	HC-XHB-6AW	HC-XH-6AW-G	S6B-XH-A(LF)(SN)	Compatibility / risk
Code	HC-XHB-6AW	HC-XH-6AW-G	-	HC-XH-6AW-G — MPN differs by 'B' and '-G' suffix. May indicate minor variant.
Manufacturer	HCTL	HCTL	JST	HCTL / JST — Same manufacturer.; S6B-XH-A(LF)(SN): Cross-vendor from original series designer.
Package	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle — Mounting type and orientation match.; S6B-XH-A(LF)(SN): Mounting type and orientation match.
Voltage Current	3A / 250V	3A / 250V	-	3A / 250V — Ratings match.
Pin Count	6	-	6	6 — Pin count matches.
Pitch	2.5mm	-	2.5mm	2.5mm — Pitch matches.
Current	3A	-	3A	3A — Current rating matches.

Application & sourcing insights

Questions & answers

The best alternative is likely HC-XH-6AW-G, as it's from the same manufacturer with a very similar part number. A strong cross-vendor option is S6B-XH-A(LF)(SN) from JST, the original designer of the XH series.