
Siproin
Functional alternative with different pinout and lower max input voltage (15V); requires board redesign.
HE2210M533R is a high-voltage (50V) 400mA LDO in a SOT-23-5 package. Finding a direct, pin-compatible replacement is challenging due to its high input voltage rating and specific pinout.
Most alternatives have a much lower max input voltage, posing a severe overvoltage risk.
While the package is the same, the pinout is different, requiring a PCB redesign.
High-voltage LDOs in this package are less common than low-voltage versions.
No direct, pin-compatible replacements were found. All candidates have significantly lower input voltage ratings and different pinouts, requiring board redesign and careful electrical review.
Search for LDOs with Vin > 50V in a SOT-23-5 package, then verify pinout. A board redesign will likely be necessary.
The primary risk is catastrophic failure from overvoltage if a low-voltage substitute is used in an application designed for the target's 50V rating.

Siproin
Functional alternative with different pinout and lower max input voltage (15V); requires board redesign.
| Feature / factor | HE2210M533R | SSP7603P33M5R | TPMIC5219-3.3YM5 | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | SOT-23-5 | SOT23-5 | SOT-23-5 | SOT23-5 / SOT-23-5 — Package matches, but pinout does not.; TPMIC5219-3.3YM5: Package matches, but pinout does not. | |
| Pinout | GND,IN,OUT,EN,NC | Different | Different | Different — Pin functions are not compatible; requires PCB redesign.; TPMIC5219-3.3YM5: Pin functions are not compatible; requires PCB redesign. | |
| Voltage | 50V | 15V | 20V | 15V / 20V — Candidate max input voltage is significantly lower.; TPMIC5219-3.3YM5: Candidate max input voltage is significantly lower. | |
| Current | 400mA | 500mA | 500mA | 500mA — Candidate offers higher output current.; TPMIC5219-3.3YM5: Candidate offers higher output current. |
No direct drop-in alternative was found. Alternatives like TPMIC5219-3.3YM5 exist but have much lower voltage ratings (20V) and different pinouts, requiring significant design changes and validation.