Is there a pin-compatible replacement for HG1V227M0611PC?

No direct pin-for-pin replacement with the same physical dimensions has been confirmed. While several parts have the same lead spacing, their can size (diameter) is larger, which requires layout verification.

What risks should I check before replacing HG1V227M0611PC?

The primary risk is physical fit; check the diameter and height clearance. Also, verify that the ESR and ripple current ratings of any alternative meet your application's requirements, especially if changing from a polymer to an electrolytic capacitor.

HG1V227M0611PC Alternatives, Datasheet & Cross Reference | HONORSAFE

Finding a substitute for the HONOR HG1V227M0611PC, a 220µF 35V polymer capacitor, requires checking package size and technology. While some alternatives offer similar electrical specs, physical fit is the main challenge.

AI replacement insight

Package riskhigh

All viable candidates have a larger diameter than the target's 6.3mm, requiring layout verification.

Electrical risklow

Several candidates match or exceed key electrical specs like voltage, ESR, and ripple current.

Can it be replaced directly?

No direct drop-in replacement has been identified due to package size differences. All candidates require physical layout verification.

Best replacement path

The closest match is HG1V227M0811PC, but its larger diameter (8mm vs 6.3mm) must be verified on your PCB layout.

Main risk

Package risk. Most alternatives are physically larger than the original part and may not fit on the existing PCB footprint.

Recommended alternatives

Electrically superior alternative from the same series, but with a larger diameter that requires a layout check.

View details

Alternative comparison matrix

Feature / factor	HG1V227M0611PC	HG1V227M0811PC	HG1H227M1012PC	Compatibility / risk
Capacitance	220µF	220µF	-	220µF — Identical capacitance.
Voltage	35V	35V	50V	35V / 50V — Identical voltage rating.; HG1H227M1012PC: Higher voltage rating provides more design margin.
Package	6.3mm x 11.5mm	8mm x 11.5mm	10mm x 12mm	8mm x 11.5mm / 10mm x 12mm — Larger diameter requires layout check.; HG1H227M1012PC: Significantly larger diameter and height.
Esr	38 mΩ	30 mΩ	38 mΩ	30 mΩ / 38 mΩ — Lower ESR is an improvement.; HG1H227M1012PC: Identical ESR.
Ripple Current	2750 mA	2980 mA	2750 mA	2980 mA / 2750 mA — Higher ripple current is an improvement.; HG1H227M1012PC: Identical ripple current rating.

Application & sourcing insights

Questions & answers

HG1V227M0811PC is the best electrical alternative from the same series, but it has a larger 8mm diameter compared to the original's 6.3mm. You must verify it fits your board.