Is there a pin-compatible replacement for HV1E476M0605PZ?

HV1V476M0605PZ is a potential pin-compatible replacement because it uses the same package. However, it is not a guaranteed drop-in substitute due to different electrical characteristics (ESR and ripple current). Engineering review is required.

What risks should I check before replacing HV1E476M0605PZ?

Before replacing HV1E476M0605PZ, you must check the substitute's package dimensions, voltage rating (should be ≥25V), ESR (target is 48mΩ), and ripple current rating (target is 850mA). Also, ensure the replacement is an Aluminum Polymer capacitor, as other types like ceramic have very different performance.

HV1E476M0605PZ Alternatives, Datasheet & Cross Reference | HONORSAFE

Finding a substitute for the HONOR HV1E476M0605PZ, a 47µF 25V Aluminum Polymer capacitor, requires careful matching of its 6.3x5.8mm package, ESR, and ripple current ratings to ensure circuit compatibility and performance.

AI replacement insight

Package riskhigh

Most alternatives have different packages, requiring a PCB redesign.

Electrical riskmedium

Even same-package options have different ESR and ripple current. MLCC options have critical technology differences.

Can it be replaced directly?

No direct drop-in replacement has been identified. The most similar part, HV1V476M0605PZ, has performance differences that must be reviewed by an engineer.

Best replacement path

The closest candidate is HV1V476M0605PZ, which shares the same package. However, it has weaker ESR and ripple current ratings, requiring careful circuit validation before use.

Main risk

The primary risks are physical incompatibility due to different package sizes and performance degradation from mismatched ESR or ripple current ratings.

Recommended alternatives

A form-fit alternate with a higher voltage rating but weaker ESR and ripple current specs.

View details

Alternative comparison matrix

Feature / factor	HV1E476M0605PZ	HV1V476M0605PZ	HV1J476M0810PZ	Compatibility / risk
Package	6.3mm x 5.8mm	6.3mm x 5.8mm	8mm x 10.5mm	6.3mm x 5.8mm / 8mm x 10.5mm — Candidate shares the same package dimensions.; HV1J476M0810PZ: Significantly larger package will not fit on the same PCB footprint.
Voltage	25V	35V	63V	35V / 63V — Higher voltage rating provides more design margin.; HV1J476M0810PZ: Higher voltage rating provides more design margin.
Esr	48 mΩ	58 mΩ	-	58 mΩ — Higher ESR may affect circuit performance.
Ripple Current	850 mA	750 mA	1100 mA	750 mA / 1100 mA — Lower ripple current rating must be verified against application requirements.; HV1J476M0810PZ: Higher ripple current capability.

Application & sourcing insights

Questions & answers

The best alternative is HV1V476M0605PZ, as it shares the same 6.3mm x 5.8mm package and has a higher voltage rating (35V). However, its ESR is slightly higher and ripple current is lower, so you must verify it meets your circuit's performance needs.