Pricing

Best Alternatives to HV1H227M1010PZ

Package: 1010HONORSAFEAluminum Polymer CapacitorsCapacitance: 220 µFRated Voltage: 50 VTolerance: ±20%ESR: 28 mΩRipple Current: 2350 mA

Finding a substitute for the HONORSAFE HV1H227M1010PZ, a 220µF 50V aluminum polymer capacitor, requires careful matching of capacitance, voltage, ESR, and package size. Alternatives may involve performance trade-offs.

AI replacement insight

Electrical riskhigh

Substitutes may have insufficient capacitance or ripple current rating.

Package risklow

A package-matched option exists, but most candidates have different footprints.

Sourcing riskmedium

Finding a true 1:1 replacement appears difficult based on this sample.

Can it be replaced directly?

No, there are no direct, fully-compatible replacements for HV1H227M1010PZ among the candidates reviewed. All options have significant parametric differences.

Best replacement path

No direct drop-in replacement was found. The closest option, HV1H107M1010PZ, has a much lower capacitance and requires engineering review.

Main risk

The main risk is circuit malfunction due to insufficient capacitance for voltage stability or lower ripple current handling causing overheating.

Recommended alternatives

1
HV1H107M1010PZ package
Needs validationhigh risk

Shares the same package and voltage but has much lower capacitance and ripple current handling.

View details

Alternative comparison matrix

Feature / factorHV1H227M1010PZHV1H107M1010PZAlt 2Alt 3Compatibility / risk
Package10mm x 10.5mm10x10.5 mm10x10.5 mm — Package dimensions match.
Voltage50 V50 V50 V — Voltage rating is identical.
Capacitance220 µF100 uF100 uF — Capacitance is less than half of the target.
Current2350 mA1800 mA1800 mA — Ripple current handling is significantly lower.
Esr28 mΩ35 mΩ35 mΩ — ESR is higher, which may affect performance.

Application & sourcing insights

Questions & answers

No ideal alternative was found. HV1H107M1010PZ has the same package and voltage but is a significant downgrade in capacitance (100µF vs 220µF) and must be reviewed by an engineer.